ISW series horizontal centrifugal pump | stainless steel horizontal clean water pump

Overview of ISW type horizontal pipeline centrifugal pump products

The ISW horizontal centrifugal pump is designed based on the structural combination of IS centrifugal pump and vertical pump, and is designed and manufactured in strict accordance with the standard ISO2858 and the new national pipeline centrifugal pump standard JB/T53058-93 as an efficient and energy-saving product. The pump is designed using hydraulic model optimization. At the same time, based on different usage temperatures, media, etc., hot water pumps, high-temperature pumps, chemical pumps, oil pumps, etc. are derived from the ISW type, which are currently standardized and promoted products in the country.

The significance of ISW type horizontal pipeline centrifugal pump model

For example: ISW100-160 (I) AB

ISW horizontal centrifugal pump

100- nominal diameter of pump inlet and outlet (mm)

160- nominal diameter of impeller (mm)

I-Traffic Classification

AB impeller through *, secondary cutting

Product characteristics of ISW horizontal pipeline centrifugal pump

1. Smooth operation: The pump shaft has excellent dynamic and static balance with concentric impellers, ensuring smooth operation and vibration.

2. Drip proof: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.

3. Low noise: The water pump under two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.

4. Low failure rate: The structure is simple and reasonable, and the key parts are matched with one flow quality, greatly improving the working time of the whole machine.

5. Easy to maintain: replace seals and bearings, simple and convenient.

6. More land saving: The exit can be arranged in three directions: left, right, and up, which is convenient for pipeline layout and installation, saving space.

The main application of ISW horizontal pipeline centrifugal pump

1. ISW type pipeline centrifugal pump is used for transporting clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden irrigation, fire pressure boosting, and equipment matching. The operating temperature T is ≤ 80 ℃.

2. The ISWR (WRG) type hot water (high temperature) circulation pump is widely used in energy, metallurgy, chemical, textile, papermaking, as well as hotels, restaurants, and other boiler high-temperature hot water pressurized circulation transportation and urban heating system circulation pumps. The ISWR operating temperature T is ≤ 120 ℃, and the WRG operating temperature T is ≤ 240 ℃.

3. ISWH horizontal chemical pump is used for conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, food, pharmaceuticals, and synthetic fibers. The operating temperature is T: -20 ℃ -120 ℃.

4. ISWB type horizontal oil pump, used for transporting petroleum products such as gasoline, diesel, kerosene, etc., operating temperature T: -20 ℃ -120 ℃.

ISW type horizontal pipeline centrifugal pump usage conditions:

1. The suction pressure is ≤ 1.0Mpa, or the high working pressure of the pump system is ≤ 1.6Mpa, that is, the pump suction inlet pressure+pump head is ≤ 1.6Mpa, and the pump static pressure test pressure is 2.5Mpa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6Mpa, it should be separately stated when ordering. In order to use cast steel materials for the overcurrent components and connecting parts of the pump during manufacturing.

2. Environmental temperature<40 ℃, relative humidity<95%.

3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm

Note: If the medium used is with small particles, please specify when ordering so that wear-resistant mechanical seals can be used.