ISG centrifugal pipeline pump (air conditioning pump)

NegotiableUpdate on 05/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ISG centrifugal pipeline pump (air conditioning pump) is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in the pipeline like a valve, with a compact and beautiful appearance, small footprint, and low building investment. If a protective cover is added, it can be used outdoors.

Product Details

ISG centrifugal pipeline pump (air conditioning pump)Product Introduction

ISGThe pipeline pump adopts a single-stage single suction vertical centrifugal pump, which is modified on the basis of IS to become a compact pump. It is not likeIS centrifugal pumpThere is a coupling like that, where the impeller of the pump is directly connected to the shaft of the motor. The motor can also be replaced with an explosion-proof motor, which can be used to transport substances such as *. Cast iron can also be replaced with stainless steel to transport corrosive liquids. If the material is replaced with stainless steel and the motor is replaced with a Pangbao motor, it can still transport a package of substances. Clever combination design and manufacturing are carried out on the basis of general vertical pumps, while ISG type vertical pumps are designed and manufactured according to different applicable temperatures and mediapipeline pumpDerived from itHot water pipeline pumpHigh temperature pipeline pumps, corrosive chemical pumps, * pumps and other series of products,ISG pipeline pumpIt has the advantages of high efficiency, energy saving, low voice, and reliable performance.

ISG centrifugal pipeline pump (air conditioning pump)Features:

1The pump is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in the pipeline like a valve, with installation feet to increase the stability of the pump. It has a compact and beautiful appearance, small footprint, and low construction investment.

2、 The ISG pipeline pump impeller is directly installed on the extended shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, thereby ensuring the smooth operation of the pump and low vibration noise.

3The shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals, which can effectively increase the service life of mechanical seals.

4、 The ISG pipeline pump is easy to install and maintain, without the need to disassemble the pipeline system. Simply remove the pump coupling nut to extract all rotor components.

5Pumps can be operated in series or parallel according to the requirements of flow rate and head.

6According to the requirements of pipeline layout, vertical and horizontal installation of pumps can be adopted.
Model parameters

1model	Flow rate Q		Head (m)	Efficiency (%)	Speed (r/min)	Motor power (kW)	Required NPSH (NPSH) r	Weight (kg)
1model	(m³/h)	(L/S)	Head (m)	Efficiency (%)	Speed (r/min)	Motor power (kW)	Required NPSH (NPSH) r	Weight (kg)
15-80	1.5	0.42	8	34	2800	0.18	2.3	17
20-110	2.5	0.69	15	34	2800	0.37	2.3	25
20-160	2.5	0.69	32	25	2900	0.75	2.3	29
25-110	4	1.11	15	42	2900	0.55	2.3	26
25-1254	4	1.11	20	36	2900	0.75	2.3	28
25-125A	3.6	1.0	16	35	2900	0.55	2.3	27
25-160	4	1.11	32	32	2900	1.5	2.3	39
25-160A	3.7	1.03	28	31	2900	1.1	2.3	34
32-100	4.5	12.5	12.5	44	2900	0.55	2.0	27
32-100(I)	6.3	1.75	12.5	54	2900	0.75	2.0	32
32-125	5	1.39	20	44	2900	0.75	2.3	28
32-125A	4.5	1.25	16	43	2900	0.55	2.3	28
32-160	6.5	5	32	44	2900	1.5	2.3	39
32-160A	4	1.1	25	34	2900	1.1	2.0	38
32-160(I)	6.3	1.75	32	40	2900	2.2	2.0	47
32-200	4.5	12.5	50	32	2900	3	2.0	55
32-200(I)	6.3	1.75	50	33	2900	4	2.0	43
32-200A	4	1.11	44	40	2900	2.2	2.0	74
40-100	6.3	1.75	12.5	54	2900	0.55	2.3	32
40-100A	5.6	1.56	10	52	2900	0.37	2.3	32
40-125	6.3	1.75	20	46	2900	1.1	2.3	34
40-125A	5.6	1.56	16	45	2900	0.75	2.3	33
40-160	6.3	1.75	32	40	2900	2.2	2.3	47
40-160A	5.9	1.64	28	39	2900	1.5	2.3	43
40-160B	5.5	1.53	24	38	2900	1.1	2.3	38
40-200	6.3	1.75	50	33	2900	4	2.3	74
40-200A	5.9	1.64	44	31	2900	3	2.3	62
40-200B	5.3	1.47	36	29	2900	2.2	2.3	52
40-250	6.3	1.75	80	28	2900	7.5	2.3	105
40-250A	5.9	1.64	70	28	2900	5.5	2.3	98
40-250B	5.5	1.53	60	27	2900	4	2.3	77
40-100(I)	12.5	3.47	12.5	62	2900	1.1	2.3	34
40-100(I)A	11	3.05	10	60	2900	0.75	2.3	32
40-125(I)	12.5	347	20	58	2900	1.5	2.3	38
40-125(I)A	11	3.05	16	57	2900	1.1	2.3	33