- Phone
-
Address
No. 345 Yunling East Road, Putuo District, Shanghai
Product Categories
Shanghai Chemical Research Institute Co., Ltd. (Shanghai Tanlian Chemical Technology)
IR explosion-proof infrared gas detector
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The IR explosion-proof infrared gas detector is mainly used for continuous gas concentration measurement in industry and laboratories. Based on the principle of infrared NDIR, it adopts infrared light source MEMS electrical modulation technology. The instrument uses German sensors and is designed for use in situations that require special explosion-proof requirements. It has good selectivity for the measured gas and can measure gas concentration with high precision and stability. The instrument has a compact structure and extremely low maintenance costs, making it suitable for extremely harsh application environments.
Product Details
Product features of IR explosion-proof infrared gas detector:
Can be applied to occasions with explosion-proof requirements
High reliability and long lifespan, no need for daily manual maintenance
● * Sensor, with stability
The anti-interference ability of * * does not require any chemical pretreatment, and users only need to ensure that the tested gas is clean and free of liquid
(Optional preprocessing device)
Ultra short preheating time, online analysis can be performed after 3 minutes of power on
No need to open the cover, the instrument can be operated with a magnetic pen
Technical specifications of IR explosion-proof infrared gas detector:
Measurement components: CO, CO2, CH4
Measurement range: 0-1% (min) 0-30% (max)
Gas supply pressure: 0.03-0.1MPa
● Detection accuracy: ≤± 2% FS ● Instrument output: 4-20mA (isolated)
● Linear error: ≤± 1% FS ● Operation mode: Magnetic pen
● Zero drift: ≤± 2% FS/every six months ● Installation form: wall mounted
● Explosion proof rating: Exd Ⅱ B+H2 T6 Gb ● Power supply voltage: 220V AC
● Explosion proof certificate number: GYB13.226X ● Instrument weight: 10kg
Infrared gas analyzer: Zhang Yiyu 186219
IR600 series multi-component infrared gas analyzer
·The IR600 series instruments are designed for continuous gas concentration measurement in industry and laboratories, suitable for various gas detection, as well as special gas detection formed in production and processing.
·Based on the principle of infrared absorption, the gas detection module not only has good selectivity for the measured gas, but also can measure gas concentration with high precision and stability.
·This module has a compact structure and extremely low maintenance costs, making it suitable for very harsh application environments.
测量组份: CO、CO2、CH4、 NH3、SO2、NO、SF6、C2H2、C4H10、C2H4、C3H8、R22、R123、R125、R134A、R404A、R290、R600、R744
Measurement range: Trace: 0-5000ppm, Constant: 0-100%
Response time (T90): approximately 15 seconds (@ 0.5 L/min)
Detection principle: Non dispersive infrared (NDIR)
Detection limit: ≤ 1% FS
Preheating time: 2 minutes
External trachea size: inner diameter 4mm, outer diameter 6mm
External gas pipe type: stainless steel pipe, copper pipe or fluororubber gas pipe
Operating temperature: 5 ℃~45 ℃
Storage temperature: -25 ℃~70 ℃
Environmental humidity: relative humidity 0% to 95%, non condensing
Work pressure: 30KPa~100KPa
Working flow rate: 0.5-1.5 L/min Stable flow rate
Analog output: 4-20 mA standard signal
Working voltage: 220VAC
36952
