IPX1-4 Rain Test Chamber

NegotiableUpdate on 10/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The rain test chamber is suitable for testing the protection level of electrical and electronic products (including components), lighting products, automotive and motorcycle parts shells and seals, etc. (IP waterproof level test), simulating the rain conditions that may affect their products during transportation and use, and testing whether their shells perform well when exposed to rain or after splashing.

Product Details

1、 Equipment Introduction:
The rain test chamber is suitable for testing the protection level of electrical and electronic products (including components), lighting products, automotive and motorcycle parts shells and seals, etc. (IP waterproof level test), simulating the rain conditions that may affect their products during transportation and use, and testing whether their shells perform well when exposed to rain or after splashing.
This device complies with international standard IEC60529, national standard GB/T4208-2008, international standard ISO20653-2013 and other testing standards such as "Protection Class of Enclosures (IP Code)". It is suitable for conducting waterproof tests on products with the second characteristic digit of IP level being 1, 2, 3, 4, 5, and 6 to meet the relevant testing requirements of IP protection level

2、 System technical features:
1. By adopting scientific design, the device is able to provide realistic simulations of vertical dripping, 15 degree dripping, water spraying, and splashing environments.
2. The control system of the entire instrument, as well as the use of frequency conversion technology, allows for the free setting and adjustment of rainfall, the rotation angle of the test rack, the swing angle of the water spray swing rod, the water spray volume, and the swing frequency.
3. Adopting an integrated water-saving and circulating water design, the control part is completely isolated from the rain testing area, and the operation control area is fully waterproof and dustproof treated.

3、 Main technical parameters:
（1） The X1、 Technical parameters for 2 drip tests:
Number of drip nozzles: 121;
Nozzle inner diameter: Ø 0.5mm;
There are a total of 6 circles inside and outside: there are 12 nozzles in 2 circles inside, with a spacing of 30 °, and 24 nozzles in 4 circles outside, with a spacing of 15 °;
Activity baffle: composed of aluminum, nozzle, and brass
Water pressure: 50-150Kpa (adjustable);
Drip distance: 200mm (adjustable);
The rainfall rate is 280L/square meter/hour,
But adjustable (adjustable major and small)
Test bench speed: 1-20r/min (adjustable);

(2） The IPX3、 4. Swing tube water pouring test (as shown in the figure below):
1. Spray pipe radius: 400mm (or 600, 800, 1000, 1200, 1400, 1600mm);
2. Inner diameter of water pipe: Ø 16mm;
3. Spray hole inner diameter: Ø 0.4mm;
4. Aperture spacing: 50mm;
5. Swing amplitude of the tube: 60 ° and 180 ° on both sides;
6. Water pressure: 50-150Kpa;
8. Flow rate: 1.8L/min (or adjusted according to standard);
9. Test turntable size: Ø 600mm;
10. Test bench speed: 1-10r/min (adjustable);
11. Spray swing rod speed: 1-15r/min (adjustable), IPX3 single-sided 60 °, back and forth 120 °, a total of 240 ° requires 4S; IPX4 single-sided 180 °, back and forth 360 °, a total of 720 ° requires 12S;
12. Test turntable material: SUS # 304 stainless steel;
13. The box is made of SUS # 304 stainless steel, with visible tempered glass doors and imported frequency converters.
（3） The IPX5、 6 Water spray test (as shown in the right figure):
1. IPX5 spray hole inner diameter: Ø 6.3mm;
2. IPX6 spray hole inner diameter: Ø 12.5mm;
3. IPX5 spray flow rate: 12.5 ± 0.625 L/min;
4. IPX6 spray flow rate: 100 ± 5 L/min;
5. Water pressure: Adjust the water flow rate according to regulations;
6. Test turntable size: Ø 600mm;
7. Test bench speed: 1-10r/min (adjustable);
8. Spray distance: 2.5-3 meters from the nozzle to the outer shell of the product to be tested;
9. Spray gun (nozzle): pure copper and stainless steel;
10. Power supply and output: AC 380V/50Hz, 2.5KW;
11. Dimensions inside the sample test chamber: width 1100 x depth 1000 x height 1100mm;
12. Outer dimensions of the test chamber: width 1500 x depth 1100 x height 1900mm;
13. The size of the nozzle flushing pipe is a cylinder with a length of 2500mm and a diameter of 400mm;
14. Spray nozzle distance test product: 2.5m-3m.

4、 Main configuration and materials:

Control system: Taiwan Weilun 7-inch color touch screen, dual group transparent flow meter;
Water spray device: IPX1, IPX2, one vertical drop test board; IPX3、 One set of 4 swing tube devices, IPX5、 Two sets of handheld water spray devices;
Box body: The test box and flushing pipe are both made of 1.2mm thick SUS # 304 stainless steel plate;
Circulating water tank: made of 1.2mm thick SUS # 304 stainless steel plate, with drainage outlet, inlet one-way valve, and high and low water level switch control;
Water pressure control system: using aluminum alloy motor for cyclic boosting and high-pressure resistant PVC pipe;
Test piece working turntable: one thickened SUS # 304 stainless steel circular turntable (adjustable for lifting), with a load capacity of ≤ 30kg;
The bottom of the box is equipped with fixed support feet and movable casters;
Security protection system: no fuse protection switch, water shortage machine warning light indicator;
Power supply: AC/380V, 50Hz.