INFLIDGE digital temperature controller with flow sensor

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

INFLIDGE digital temperature controller with flow sensor $r $n $r $n The digital temperature controller DAC-8EF adds air volume adjustment function to the popular DAC-8E at an affordable price. It can precisely control the hot air temperature of the air heater. Simply connect the air heater $r $n and supply air to use. The maximum air volume of r n is 100L/min.

Product Details

INFLIDGE digital temperature controller with flow sensor

The digital thermostat DAC-8EF adds air volume adjustment function to the popular DAC-8E, making it affordable. It
It can accurately control the hot air temperature of the air heater. just
Connect the air heater and supply air to use.
The maximum air volume is 100L/min.

feature

The characteristics of the digital temperature controller DAC-8EF are as follows:

Stable hot air temperature
It can be automatically adjusted throughout the entire temperature range.
Adopt a control method suitable for fast start air heaters.
Simply operate to set the air volume and temperature.
Various alarm outputs can notify customers of abnormal situations in their safety circuits.

main purpose

When used in combination with SEN type air heater (with built-in temperature sensor), it is suitable for point heating applications that require precise temperature control, as shown in the following figure.

Preheating and final heating of solder (preheating is particularly effective for lead-free solder)
Deburring, cutting, and bending of resin and metal products
Drying of adhesives, inks, and paints
Bending of wound coils
glass processing
Other local heating applications

product photo

Usage Instructions

Before connecting the power input terminal, please ensure that the power cord is disconnected.
Ensure that the power switch of this device is turned off before connecting it to the terminal block.
Do not disassemble or modify this device.
We are not responsible for any malfunctions or accidents caused by customers' own modifications.
Incorrect wiring of this device may result in malfunctions or dangerous accidents. Before powering on, please check if the wiring is correct.
Please use within the rated specification range.

1	Flow setting and display	9	3) Sensor (thermocouple) input terminal (+)
2	Temperature setting and display		4) Sensor (thermocouple) input terminal (-)
3	Flow sensor power switch		5) Event output terminal (COM)
4	Temperature controller power switch		6) Event output terminal (EV1)
5	fuse		7) Event output terminal (EV2)
6	Fluid outlet (with a diameter of 8 pipes)		8) External input terminal (RSW1)
7	Fluid inlet (with a diameter of 8 distribution pipe)		9) External input terminal (COM)
8	Power input terminal	10	Flow sensor terminal
9	Temperature controller connection terminal		10) Switch output terminal (+)
	1) Heater output terminal		11) Switching output terminal (-)
	2) Heater output terminal

specification

power supply voltage	Communication 100V 50/60Hz	AC 200V 50/60Hz
Maximum load current	10A
Using a heater	Maximum study time
temperature range	0〜800℃
control method	Temperature controller: PID, flow rate: needle valve
precision	Thermostat: ± 0.3% FS, flow rate: ± 3% FS
Event output	Temperature controller: 2 event output points, flow rate: 1 event output point
Contact rating	Thermostat: AC250V/DC30V 2A (resistant to load)
Contact rating	Flow (switch output): NPN collector open circuit output (below 50mA, voltage drop below 2.4V)
external input	Temperature controller: external input number: 1, flow rate: none
input format	Temperature controller: no voltage contact or open collector, flow rate: none
Gas type	Air/nitrogen * injection 1
Flow control range	3~100 liters per minute
pressure resistance	1 megapascal
pressure range	0-0.75MPa (standard pressure 0.3MPa)
size	W161 × H119 (including rubber feet) × D200 (excluding terminal block)
quality	About 2.6 kilograms

*For the purpose of improvement, specifications are subject to change without prior notice.

Note 1: The gas must be dry and free of corrosive substances (chlorine, sulfur, acid). The gas must be clean and free of dust and oil mist.
Note 2: If there is a possibility of foreign objects entering the equipment, please install filters, etc.
Note 3: When not using this product, please use a shut-off valve or other means to stop the gas supply.