Hydrogel high and low temperature tensile machine

1Hydrogel high and low temperature tensile machineProduct Overview:

FuleFULE high and low temperature tensile strengthexperimentMachine configurationFL high and low temperature test chamber device, used for testingvariousThe mechanical properties of materials such as tensile, compressive, bending, tearing, peeling, and shearing under high and low temperature environments can be tested by this testing machine, which can also perform various mechanical tests at room temperature to meet the requirementsGB/ISO/FL/FUL/ASTM/JIS/DIN and other testing standards, the Fule high and low temperature tensile machine microcomputer control system automatically collects and processes test data, draws various curves, and prints test reports. The high and low temperature tensile testing machine is equipped with an environmental testing chamber device for wide range temperature testing, plusFuleComprehensive and versatile tooling testing deviceComprehensive service, versatile helper!

IIHydrogel high and low temperature tensile machineProduct specification and model selection

Technical model of high and low temperature tensile testing machine:FL4104GD,FL4204GD,FL4304GD,FL5504GD,FL5105GD

1rated loadExperimental force:5KN、10KN、20KN、30KN、50KN、100KN；

2. Test force level:Level 0.3/Level 0.5;

3. Test force measurement range: 0.4% -100% FS;

4. Displacement rate adjustment range: 0.0001mm/min--700mm/min (adjustable arbitrarily);

5. Electronic limit protection, emergency stop button, and software overload automatic protection;

6Test fixture device: tension, compression, bending, shearing, peeling, tearing, bondingWaiting for fixtures；

7Temperature measurement range of high and low temperature test chamber:-196°~+350 °, cooling method: liquid nitrogen/single compressor/dual compressor

8Low temperature range: cooling time≤80min， Temperature gradient: ≤ 2℃Temperature fluctuation: ≤± 1℃

9Temperature deviation:≤± 2, when the temperature is ≤ 200℃time/≤± 3.5, when the temperature is ≥ 200℃time

10Temperature control meter display accuracy:≤±0.1℃Studio size (deep)Width x Height: 400 x 400 x 600mm or 400 x 350 x 600mm;

11Usage environment: Temperature+5℃～+35℃Humidity: ≤ 85% RH; Atmospheric pressure: 86-106KPa

12power supplyAC220 (1 ± 10%) V (50 ± 0.5) Hz three-phase four wire+protective earth wire

13Safety devices: leakage protector box overheat protector, fan overheat protector, andPID over temperature protection

Fule Instrument is a professional manufacturer of mechanical testing for high and low temperature environments.