Human vehicle separation radar wireless airbag/edge switch

Human vehicle separation radar wireless airbag/edge switchcharacteristic

Product size: 135mm40mm32mm (2 pieces) Transmission frequency: 433MHz Operating voltage: 24VDC Battery type: 2 * CR2032 Output type: Relay (passive) Response time:<0.1 seconds Response distance:>30 meters

Human vehicle separation radar wireless airbag/edge switchApplication scenarios

2. Set code learning (default learned at factory, generally no need to learn again): 1. Press and hold the code acceptance button on the receiving terminal for 3 seconds, and the blue light on the receiving terminal will flash; 2. Blow air into the pressure switch (or press the code button on the transmitter end), and the blue light will turn on; 3. If the blue light on the receiving end flashes and returns to normal, it indicates a successful pairing. Mode selection (sender): When S1 is selected, it receives air pressure input or J2 terminal signal input, and receives relay output pulse signal. When S2 is selected, the receiving relay outputs a pulse signal upon receiving the air pressure input; When the J2 terminal signal is input, the receiving relay outputs and maintains the signal until the J2 signal is disconnected. Replace battery (transmitter terminal): 4. If the red indicator light on the transmitter terminal is constantly on, it indicates that the battery level is low and needs to be replaced; 5. The blue indicator light on the receiving end is flashing, indicating that the battery level is low and should be replaced or charged to stop flashing. 6. Loosen the fixing screws of the emitting end circuit board and replace the two CR2032 batteries on the back.