Horizontal guardrail thrust meter, safety fence detector

NegotiableUpdate on 06/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Horizontal guardrail thrust tester, safety fence detection device, road and bridge construction projects are also increasing, and there are safety guardrails that are matched with construction projects. What standards should safety barriers on both sides of roads and bridges meet, and how should they be tested? At present, there is no established standard in China, and the road and bridge inspection is still relatively primitive. The YD-10 guardrail thrust detector has been designed and produced. This guardrail thrust detector has a novel and reasonable structure, simple operation, and easy portability, which solves many difficulties for scientific research and testing units,

Product Details

Horizontal guardrail thrust meter, safety fence detectorPurpose: Suitable for horizontal thrust detection of protective barriers in construction acceptance of roads, bridges, buildings and other engineering projects.

2.Horizontal guardrail thrust meter, safety fence detectorMain technical parameters

Thrust range:0-10KN（0-1000KG）

minuteResolution:0. 001KN

essenceDegree: ±1%

Cylinder stroke:0-50mm

Adjust the itinerary:1.5 m-2m

Displacement stroke:0-30mm

minuteResolution:0.01mm

3. Testing steps and working principle of horizontal guardrail thrust meter and safety fence detector

Before testing, select a suitable reaction force support point, adjust the appropriate distance through the thread of the thrust gauge, assemble the pressure sensor, and connect the digital display. The reaction force support point is on the same horizontal plane as the guardrail. Connect the hydraulic pump quick connector to the hydraulic cylinder correctly, open the instrument to reset the data, tighten the hydraulic pump unloading valve clockwise, and start pressurizing until the specified detection force value is reached. Release the unloading valve counterclockwise and observe if the guardrail is deformed.

6.2 Usage Method

Force measurement

1. Hold down any key2The instrument panel will turn on in seconds.

2. Press the 'Reset' button again to reset the displayed value on the instrument panel.

3. Press the peak button to enter the peak measurement state of the instrument.

4. Pressurize, the maximum value will be maintained at all times.

After the measurement is completed, press the 'Save' button to select 'Save', and the instrument will automatically save the measurement results. This instrument can store 200 pieces of data, making it convenient for users to store and protect data more effectively.

Intensity measurement

By selecting the area of the test block through parameter settings, strength measurement can be directly carried out, and the unit will be displayed after the measurement valueMPa, as shown aboveF1TheF2TheF3TheF4Representing test blocks of different models.

Instrument support4Planting hook test block:

F1-100×100mmtest block

F2-95×45mmtest block

F3-40×40mmtest block

F4-φ50mmtest block

6.3Parameter Settings

Data query and deletion

Lightly press the 'Settings' button to query stored data, and use the' Peak 'and' Reset 'buttons to view the previous or next data. Lightly press the 'Settings' button again to enter the data deletion interface. Long press on the data deletion interface3After the reset button is pressed in seconds, the instrument panel will delete all saved data and send out a commandWith a beep sound, return to the measurement state.