Horizontal fuel gas thermal oil furnace

Organic heat carrier boilers are boilers made using coal, heavy oil, light oil, combustible gases, and other combustible materials as fuels and heat transfer oil as the heat carrier. Using a circulating oil pump to transfer heat to the heating equipment, and then returning it to the reheated DC special industrial furnace, heat transfer oil, also known as organic heat carrier or heat medium oil. As an intermediate heat transfer medium, it has been used in industrial heat transfer processes for over fifty years.

Horizontal fuel gas thermal oil furnaceThe principle is that the furnace is a closed circuit, and the return of oil temperature and oil temperature is only 20-30 degrees, which means that only a temperature difference of 20-30 degrees can reach the operating temperature. Add a steam boiler to cold water, heat the cold water into a steam heating device, and condense the steam into 60-70 ℃ before discharging. Therefore, it plays a role in energy conservation and consumption reduction.

The gas thermal oil heating furnace adopts a circulating oil pump to force liquid-phase circulation, transferring heat energy to the thermal equipment, and returning to the heating furnace after one heating in the industrial furnace. Widely used in industries such as petrochemicals, textiles, printing and dyeing, plastics, rubber, food processing, wood processing, asphalt heating, cardboard boxes, etc. It can also be baked, steamed, molded, dissolved, and dried at temperatures ≤ 350 ℃.

This series of boilers has a compact heating surface structure. The heating surface is composed of tightly arranged disks inside and outside. The inner spiral tube is a radiating heating surface, while the outer surface of the outer spiral tube forms a convective heating surface with the inner tube. The boiler consists of upper and lower combustion chambers, which are assembled on-site. After sufficient combustion in the combustion chamber, the radiation heating surface absorbs most of the heat, and the high-temperature flue gas enters the convection heating surface for heat exchange. After the air required for boiler combustion leaves the boiler, it is heated in the air preheater, and the flue gas enters the chimney and is discharged into the atmosphere through the induced draft fan and dust collector.

Horizontal fuel gas thermal oil furnaceProduct Features:

·

·The heating surface adopts closely arranged disc-shaped tubes, with sufficient arrangement to reduce the heat load on the tube surface.

·The medium flow rate is reasonable, the thermal conductivity of the oil field is low (in) and out, and the gas generated during operation can better improve the thermal efficiency of the boiler.

·The adiabatic combustion of fuel in the combustion chamber can make combustion and ignition easier, combustion more complete, and better improve the thermal efficiency of the road.

·The dense arrangement of coils on the furnace top can better protect the furnace top and prevent it from burning out.