Double helix cone mixer

Double helix cone mixerThe mixed part consists of two asymmetric cantilever helices, each of which rotates around its axis.

At the same time, it also revolves around the central axis of the conical container, using the rotation of the rotating arm to make the planet move (rotate) closer to the conical wall.

The revolution and rotation cause the material to continuously rise, generating complex movements such as shear, convection, and diffusion in the cone, achieving the purpose of stirring. product

The outer sheath (heating, cooling) and spray can be designed according to requirements. Widely used in industries such as chemical, pharmaceutical, pesticide, dye, and building materials for powders and powders.

A mixture of body and reaction. According to the process requirements, the machine can add a jacket to the mixer cylinder to achieve the injection of cold and hot media.

The material is cooled or heated; Cooling is usually pumped into industrial water, and heating can be steam or electric heating of heat transfer oil

Spiral arm, central rod, and spiral conveyor: The spiral conveyor consists of a spiral and a spiral plate, with the spiral plate being the direct working component of the mixed material. In order to ensure the rigidity of the screw, reduce weight, and facilitate the welding of the spiral plate, a screw was made. 20 steel pipes. Spiral blade welded on the right side, with

There is a certain diameter and pitch. The upper end of the screw is connected to the cross arm, and the lower end is connected to the central pull rod, symmetrically on both sides. The connection form of this triangular symmetrical load-bearing component is balanced, improving the load-bearing state of the component. The lower end of the screw can be supported independently of the container by the tension of the central pull rod, so there is no need to set a fixed bottom support structure at the bottom of the equipment.

Unloading valve: Removing the bottom bearing at the bottom of the equipment is beneficial for unloading. This machine is designed with an exhaust valve consisting of two overlapping fan orifice plates. The valve has a simple structure and does not take up space. The size of the discharge port can be freely controlled. Easy to operate. Can clean and disassemble materials. Therefore, it is beneficialDouble helix cone mixerCleaning and maintenance