Horizontal and vertical combustion instrument

Touchscreen modelHorizontal and vertical combustion instrument0.5 cubic box

1 Scope of application

Horizontal and vertical combustion instrumentA testing instrument used to test the combustion performance of plastic and non-metallic materials. Suitable for plastic and non-metallic material specimens inLaboratory testing method for horizontal or vertical combustion performance under 50W flame conditions.

2、 Product functional features

1. Programmable controllertouch screen+PLC controlRealize multifunctional control/detection/calculation/data display
2. High degree of automation: automatic recording of test time, automatic display of test results, automatic timing, automatic ignition, and automatic retraction of the burner after flame applicationYou can choose whether to turn off the gas or not

3. When starting, you can choose whether to automatically ignite or not
4.The front, back, up, and down movements of the style clip can be controlled by touch screen. Start, stop, gas, timing, ignition, save, save, lighting, and exhaust are all controlled by touch screen. The experiment can be completed with a light touch of your fingertips
5.Timing button coordinationPLC automatically records and stores combustion time consumption

6. The test time system automatically records and generates test results

3、 RelatedRelated technical parameters

1. Environmental temperature: Room temperature~40℃； Relative humidity: ≤ 75%;

2. Supply voltage and power:220V ± 10% 50HZ power 150W

3. The horizontal and vertical combustion testing programs can be switched on the touch screen, and the test results can be stored and queried on the touch screen;

4. Bunsei Lamp Automatic IgnitionAutomatic timing, ignitionTime can be set arbitrarily(Can be preset on the touch screen)

5. Inner diameter of Bunsei lamp9.5mm±0.5mm

6. Before starting the main light, you can choose whether it will automatically ignite

7. After applying the flame, the Bunsen burner will automatically retract. The option to retract the burner is to choose whether to turn off the gas

8. Gas source: liquefied petroleum gas (methane gas from the processing industry during arbitration);Note: The gas source and connection head should be provided by the user themselves

9. Steel plate electrostatic spray box body

10. greater than0.5 cubic meters (supporting non-standard customization of 0.75m ³, 1m ³ sizes, and stainless steel box bodies)

11. The weight of the instrument is approximately:100kg

12. working power supply ： 220V AC 50HZ

13. Timing range:Timing accuracy from 0 to 999.9s: 10s ± 0.2s, 30s ± 0.2s;

14. Flame application time ： 0~999.9S (adjustable), can be preset on the touch screen）

15. Residual flame time ： 0～999.9S

16. Yu Zhuo Time ： 0～999.9S

17. Linear combustion rate（V）PLC automatic calculation, touch screen display and saving

18. Combustion angle ： 0 °, 20 °, 45 ° can be selected

19. flame height ： 20mm ~ 130Mm adjustable

20. Flame temperature:（Adjustable from 100-1000 ℃

21. gas flow rate ： gas flow rate105ml/min-1000ml/min adjustable

22. burn burn lamp ： Inner diameter of lamp tube9.5 ± 0.3mm, length: 100mm ± 10mm

23. Time device ： Can be precise to0．1S

24. Position adjustment ： The sample holder bracket can be adjusted up and down, left and right, the combustion seat can be adjusted back and forth, and the adjustment stroke is large

25. Flame calibration device:Optional

a.Temperature testing range:0~1000℃

b.Flame temperature requirement: fromThe time for 100 ℃± 5 ℃ to rise to 700 ℃± 3 ℃ is within 44s ± 2s

c.Φ 0.5mm (K-type) nickel chromium/nickel aluminum wire thermocouple, insulated to ground

d.Heat transfer copper block:Ф5.5mm， The mass is 1.76g ± 0.01g

26. Gas alarm systemOptional

27.Overall dimensions: Width 1160mm x Depth 600mm x Height1310 (including feet)mm

28.Volume of combustion test area:＞0.5 cubic,long*Width * height approximately900mm×590mm×1050mm, Background black, background illumination ≤ 20Lux

29.The top is equipped with a silent and anti backflow exhaust device, which can discharge the smoke generated by combustion after the test is completed

4、 Applicable standards

Design standards:GB-T2408-2008 "Testing of Burning Properties of Plastics - Horizontal and Vertical Methods"（ANSI/UL94-2006）

GBT10707-2008 "Determination of Rubber Combustion Properties" Method B (i.eGB-T13488 "Determination of rubber combustion performance - Vertical combustion method"）

applicablestandard

ANSI/UL94

GJB360B-2009 Test Methods for Electronic and Electrical Components

GB/T5169.16-2008

IEC60950-1