Horizontal and Vertical Combustion Tester

Horizontal and Vertical Combustion Tester/Vertical Combustion Tester/Combustion Tester Model: DP-5

Horizontal and Vertical Combustion TesterSuitable working conditions and main technical indicators of the instrument

1. Environmental temperature: Room temperature to 40 ℃; Relative humidity: ≤ 75%;

2. Power supply voltage and power: 220V ± 10% 50HZ power 150W

3. Automatic ignition time of the lamp: arbitrarily set

4. Lamp inner diameter 9.5mm ± 0.5mm

5. Gas source: liquefied petroleum gas

6. Steel plate electrostatic spraying box

7. More than 0.5 cubic meters (steel plate electrostatic spraying version)

8. Instrument weight approximately: 100kg

9. Working power supply: 220V AC 50HZ

10. Timing range: 0~999s Timing accuracy: 10s ± 0.2s 30s ± 0.2s;

11. Flame application time: 0-99.9S (adjustable)

12. Residual flame time: 0-99.9S (adjustable)

13. Remaining burning time: 0-99.9S (adjustable)

14. Combustion angle: 0 °, 20 °, 45 ° can be selected

15. Flame height: adjustable from 20mm to 175mm

16. Flame temperature: (100-1000) ℃ adjustable

17. Gas flow rate: adjustable from 105ml/min to 1000ml/min

18. Combustion lamp: inner diameter of lamp tube 9.5 ± 0.3mm, length: 100mm ± 10mm

19. Time device: can be accurate to 0.5S

20. Position adjustment: the sample holder bracket can be adjusted up and down, left and right, the combustion seat can be adjusted back and forth, and the adjustment stroke is large

21. Dimensions: Width 1160mm, Depth 600mm, Height 1310 (including feet) mm

22. Combustion test area volume:>0.5 cubic meters, length * width * height approximately 900mm × 590mm × 1050mm, background black, background illumination ≤ 20Lux

Dark box type three purpose UV analyzer/three purpose UV analyzer/UV analyzer model: DP-203B

1、 Principle

This instrument is composed of ultraviolet lamps and filters. It can emit 253.7nm and 365.0nm ultraviolet rays separately, and can also mix and use two wavelengths at once.

Main technical indicators

Wavelength: 253.7nm, 365.0nm

Color filter: 150 × 50 (mm)

Dimensions: 300 × 300 × 270 (mm)

Large irradiation area: 250 × 250 (mm) (usable area)

Power supply: AC220V ± 10% 50HZ

Weight: 3Kg

Desktop Three Frequency CNC Ultrasonic Cleaner/Three Frequency CNC Ultrasonic Cleaner Model: DP-300VDE

Main technical indicators

Steel bar detector/steel bar position detector model: DP-180

Product features:
Measure the thickness of the concrete protective layer
Position the steel reinforcement
Estimate the diameter of steel bars
Main technical indicators:
1. Measurement range of protective layer thickness (nominal):
Range (nominal): 6mm to 90mm
Two range (nominal) range: 7mm~200mm
2. Measurement range of steel bar diameter (nominal): Ø 6 to Ø 50mm
3. The measurement value of the thickness of the steel reinforcement protective layer has a large allowable error:
Maximum allowable error (mm) Protection layer range Protection layer range
≤±1 6～59 7～79
≤±2 60～69 80～119
≤±4 70～90 120～200
4. Large allowable error range for measuring the diameter of steel bars: ± 1 level
5. Normal working environment requirements:
Working temperature: -10 ℃ to+40 ℃
Relative humidity:<90% RH

Ultrasonic level gauge Model: DP-RPF

Main functional features:

·Distance accuracy online calibration can be performed in different environments, and the range start and end points, output analog type, and liquid level window lock values can all be set with a keyboard.

Main technical indicators: (Models other than the following parameters can be customized)

Product Model DP-RPF

Range 5m, 10m, 15m

Detection blind zone ≤ 400~800mm (depending on the range and sensor)

Detection accuracy of 0.25~0.5% F.S (at 25 ℃, beyond blind spot range, calm target surface)

Output signal 4-20mA two-wire system, three wire system, four wire system; 0~20mA

1~5V，0~5V

RS485，RS232；

1-4 switch signals, 1-4 relay outputs

(Default 4-20mA three wire system, other output methods can be customized)

Display mode LCD; LED (two-wire system only displays four liquid levels on LCD, choose any other option)

Working temperature range of 0~50 ℃ (default, customizable for a wider temperature range)

Working power supply DC24V/300mA (default, customizable AC220V/50hz, or DC wide voltage supply)

Outgoing method: quick connect terminal block

Installation method: Threaded installation, thread size M68 × 2.0