Hoecherl jackl PLI electronic load for battery detection

Hoecherl jackl PLI electronic load for battery detectionPLI508MR4

Brand Introduction:

Hoecherl jackl PLI series electronic loads for battery testing in new energy vehicles

The PLI series electronic loads provide convenient operation through a graphical user interface.

The advantage of this device is that it has a very rich interface.

In addition to Ethernet, USB, RS-232, and analog I/O ports, CAN interface is also standard.

GPIB is optional (PLI02).

By using the PLI MR multi range model, the minimum current can be set and measured with high precision and resolution.

PLI series electronic load features:

High power density of up to 28800 W

Basic operating modes CC, CV, CR, CP

Combination operation modes CC+CV, CR+CC+CV, CP+CC+CV, CV+CC

Models with multiple current ranges

Models with zero voltage, high voltage, or extended current range

Adjustable current and undervoltage protection

Optional MPP tracking

Optional intelligent charger test

Master-slave operation

Dynamic load with synchronized DAQ

Directly record data to USB flash drive

Test the functionality of energy storage devices

Internal resistance measurement

Watchdog function in remote operation

Temporary overload capacity

Electronic protection

Digital input and programmable control output

PLI508MR4 parameters:

Voltage range: 80 V

Current range: 0.06 A/0.6 A/6 A/60 A

Resistance range: 33.4 Ω .. 14.3 kΩ/3.34 Ω . .. 1.43 kΩ/0.34 . .. 143 Ω/0.034 . .. 14.3 Ω

Power range continuous/short-term: 4.8 W/4.8 W; 48 W / 48 W； 200 W / 200 W； 500 W / 1000 W

Shell: Half 19 ", 2 U

Hoecherl jackl PLI electronic load for battery detectionPLI508MR4