High vacuum box furnace

High vacuum box furnaceProduct Technical Parameters:

Temperature range: 100~1000 ℃

Volatility: ± 3 ℃;

Display accuracy: 1 ℃;

Furnace size: 600x600x600mm;

Heating rate: ≤ 20 ℃/min;

Overall power: 15KW;

Power supply: 380V; 50Hz;

Furnace material: 310S high-temperature stainless steel;

Heating element: High temperature stainless steel heating tube;

High vacuum box furnace, also known as vacuum atmosphere box furnace, is a device that can be heated in a vacuum environment or a controllable atmosphere (such as inert gas, reducing gas, oxidizing gas),
The core advantages are air isolation, precise temperature control, and avoidance of oxidation, nitriding, and carbonization. It is widely used in industries that require high-precision heat treatment, material synthesis, or purity control.

Vacuum box atmosphere furnaceeffective volume60*60*60cm(Ensure smooth placement)58*58cmThe sample The material of the inner box is stainless steel (with requirements for dust and particles, strictly controlled) and can be connected to a nitrogen atmosphere

Furnace operating temperature according to1000℃It can be controlled in multiple stages, such as heating up1℃/minHeat up to300℃insulation3hThen heat it up again1℃/min, to400℃insulation3hFurther cooling is necessary; or
The person is200℃insulation200Hours) and can export temperature control data. In addition, the uniformity of the temperature field requires effective control within the space±5℃, that is, the temperature difference within the volume10℃Within. There is a support layer (partition) inside the furnace,
Specifically similar6Pull out shelves with layer to layer gaps10cmLeft and right, each layer can be pulled for easy removal and insertion of samples. The support layer (partition) is easy to remove, disassemble, and clean.

Vacuum box atmosphere furnaceKSX3-666Product Structure:

The stove adopts a double-layer inner liner, with the inner layer made of310sHigh temperature stainless steel material, with high-temperature stainless steel heating elements arranged at the bottom and on both sides of the inner tank. The two sides are designed to hold the partition of the sample, and every layer is
height100mm;Each floor is equipped with a movable high-temperature stainless steel partition, which can be flexibly accessed and placed;

6The inlet and outlet ports, as well as the sensor, are located at the back of the furnace. The outer layer is a water-cooled interlayer, and the upper, lower, left, and right sides are made of304Stainless steel water jacket is used for water cooling of the furnace liner;The control system adopts
programmableLTDE instrument, and can be connected to a computer to export temperature control data;The insulation layer of the furnace is made of ceramic fiber board or fiber cotton; Shell cold plate spray coating;