High temperature viscosity tester

The S-OSI-8 high-temperature adhesion tester developed by ChemInstruments in the United States has been upgraded to the SS-OSI-8 model, which is suitable for testing the adhesion performance of pressure-sensitive adhesives under high temperature conditions. The design of this machine complies with the testing standards for pressure-sensitive adhesive performance in Europe, America, and other countries, such as PSTC-7 A, FINAT 8, TLMI 7, and ASTM D 3654 C.

　　High temperature viscosity testerProduct Description: How to Translate

The SS-OSI-8 high-temperature adhesion performance tester developed by ChemInstruments in the United States is an upgraded version of S-OSI-8, suitable for testing the adhesion performance of pressure-sensitive adhesives under high temperature conditions. The design of this machine complies with the testing standards for pressure-sensitive adhesive performance in Europe, America, and other countries, such as PSTC-7 A, FINAT 8, TLMI 7, and ASTM D 3654 C. This instrument is equipped with a conversion switch that can be used for high-temperature furnaces, with temperatures up to 400 ° F (204 ℃). The instrument has practical, reliable, and easy to operate functions, and is a device for testing holding force at high temperatures. Oven with 8 sets of holding devices. The controller is embedded on the oven base panel

　　Product Features:

Durable and easy to operate.

According to PSTC regulations, use 2 '× 3' (5cm × 7.5 cm) standard steel sheet, TP-23

The maximum thickness of the steel sheet can be reduced to 6mm.

There are 3 modes, and the programmable operator with 30 steps can perform SAFT slow heating operation.

Up to 10 sets of programs can be created.

The switch unit component can withstand a temperature of 400oF (204 ℃)

Oven with maximum temperature resistance of 260 ℃

The lifting weight can be adjusted from 100g to 1000g

The hanging angle can be adjusted from 178 ° to 90 °

The temperature accuracy can be ± 1 ℃ at 210 ℃ and ± 2.8 ℃ at 260 ℃

The heating rate can be controlled to 1 ℃/minute

The timer is embedded in front of the oven, streamlined and space saving.

Detachable windshield, capable of buffering rapid temperature changes.

The timer is a 1cm wide display screen that shows up to 0.1 minutes

The interior of the oven is made of stainless steel material.

Hot air convection type

Front observation window

Electronic safety functions such as over temperature protection

240 VAC standard oven input voltage (50 Hz)

　　Size:

Overall reality

Height: 87cm 48cm

Width: 71cm 58cm

Depth: 65cm 48cm

Weight: 65kg

　　Suggested products for purchase:

1. STA1000 (8) Retention Tool Kit, including

TP-23 standard steel sheet 2 '× 3', 8 pieces;

STC-100 suspension clamp x 8 pieces;

TW-1000 1000g lifting weight x 8 pieces.

2. STA500 (8) Retention Tool Kit, including

TP-23 standard steel sheet 2 '× 3', 8 pieces;

STC-100 suspension clamp x 8 pieces;

TW-500 500g lifting weight x 8 pieces.

　　Other optional items:

1. SC-100, Cut 1 'cutter

2. SC-050, Cut 1/2 'cutter

3. Steel sheets of other sizes

4. Other weight codes