High pressure gear flowmeter price_kewill

NegotiableUpdate on 12/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

High pressure gear flowmeter price: It consists of a measuring box and a pair of elliptical gears installed inside the measuring box, forming a sealed lunar cavity with upper and lower cover plates (not absolutely sealed due to the rotation of the gears) as the unit for calculating the displacement. When the measured liquid enters the flowmeter through the pipeline, the pressure difference generated at the inlet and outlet drives a pair of gears to rotate continuously, continuously delivering the liquid measured by the initial lunar cavity to the outlet. The product of the number of revolutions of the elliptical gear and four times the displacement per time is the total flow rate of the measured liquid.

Product Details

High pressure gear flowmeter price_kewill

principle

A sealed lunar cavity (not absolutely sealed due to the rotation of the gears) is formed by a measuring box and a pair of elliptical gears installed inside the measuring box, along with upper and lower cover plates, as the unit for calculating the primary displacement. When the measured liquid enters the flowmeter through the pipeline, the pressure difference generated at the inlet and outlet drives a pair of gears to rotate continuously, continuously delivering the liquid measured by the initial lunar cavity to the outlet. The product of the number of revolutions of the elliptical gear and four times the displacement per time is the total flow rate of the measured liquid.

High pressure gear flowmeter price_kewill

structure

'The elliptical gear flowmeter consists of a flow transmitter and a counting mechanism. Installing a radiator between the transmitter and the counting mechanism constitutes a high-temperature flowmeter. The transmitter consists of a measuring chamber equipped with a pair of elliptical gear rotors and a sealed coupling, while the counting mechanism includes a reduction mechanism, an adjustment mechanism, a counter, and a transmitter.'

application

Suitable for various oil products such as asphalt, lubricating oil, vegetable oil, diesel, petroleum, residual oil, kerosene, engine oil, gasoline, heavy oil, fuel oil, thermal oil, crude oil, light oil, insulation oil, hydraulic oil, etc.

Technical Specifications
Nominal diameter（mm）	DN10～DN200
Measured liquid viscosity:	2～3000（mPa. s）
Protection level:	IP65(Special customization)IP68）
Repetitive error:	The measured values±0.2%、±0.5%
Accuracy level:	0.2Level,0.5level
Temperature of the tested medium:	Room temperature type: -20～60℃
	High temperature type: +60℃～200℃
	Ultra high temperature type:220℃
Rated working pressure: (High voltage can be customized)	Cast iron: ≤1.6MPa
	Stainless steel: ≤1.6MPaor2.5MPa
	Cast steel: ≤2.5MPa（4MPa，6.5MPaOptional)
Output signal:	Pulse signal or4－20mAcurrent signal
Current output:	load resistor
Current output:	load resistor
	The upper limit of output frequency can be within1～5000HZInternal setting with photoelectric isolation
	The collector of the transistor is open circuited for bidirectional output. external power supply
Digital frequency output:	≤35VThe maximum collector current during conduction is250mA
Power supply:	DC24Vor3.6Vbattery
Total power consumption:	less than20W
Ambient temperature	below zero40～＋60℃
relative humidity	5%～95%

Selection Table

FG10-	Cast iron universal gear flowmeter
FG20-	Cast steel universal gear flowmeter
FG30L-	Stainless steel gear flowmeter.1.4301(304)
FG30K-	Stainless steel gear flowmeter.1.4435(316L)
	Applicable Pipe Diameter
		DN10 - DN200 (mm)Please refer to the selection code table for details
		connection method
			Flange type connection
			External thread connection
			Viscosity of the tested liquid
				0.3~0.6mpa.s
				0.6~2mpa.s
				2~200mpa.s
				200~1000mpa.s
				1000~2000mpa. s
				Temperature of the measured medium
					Room temperature type-20～60℃
					high-temperature type60～220℃
					accuracy class
						0.5level
						0.25level
						0.2level
						Voltage resistance value
							Please refer to the parameter options for details1.0=1MPa
							signal type
								pulse signal
								4~20mAcurrent signal
								No signal
								Alternative: On site display system
									Mechanical character wheel accumulation display unit(alternative options)
									Mechanical character wheel accumulation display unit+reset function
									LCD digital display unit(alternative options)
									Insulation jacket function (this option must be selected for easily curable media)
									Shrinking and expanding function
FG10-									← Selection Example

Keweiler (China) Automation Co., LtdyesKewill Automation GmbH, a wholly-owned subsidiary of Kewill Automation GmbH in Germany, has a strict quality inspection management system and a comprehensive after-sales service system, with flow sensing technology and high quality. The company has invented heat transfer technology and successfully applied it to the field of flow measurement, which has now become an industry standard. Kewill's analytical instruments, environmental instruments, flow monitoring, temperature monitoring, pressure monitoring, and liquid level monitoring products are highly regarded in the field of industrial production process control. The company, located in Rodingsmakt20, Hamburg, Deutschland, Germany, is the largest manufacturer of ultra small caliber flow monitors and switches. Kewill, a timeless brand, has introduced its philosophy, technology, products, and high standard after-sales service system to China, enabling Chinese users to improve the quality and market competitiveness of their products and engineering while using Kewill products. In order to facilitate users' understanding and purchase of Kewill's products, she is supervising a reasonable distribution organization and improving sales processes in China.