High power bearing induction disassembler SMHC-1/2/3/4/5

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SMHC series high-power bearing induction disassembler SMHC-1/2/3/4/5 uses SMHC series heaters, and the inner ring is already heated before the roll neck is heated. You can easily remove the inner ring induction disassembler from the roll neck together. Even for relatively large inner circles, the entire operation process only takes two to three minutes.

Product Details

SMHC seriesHigh power bearing induction disassembler SMHC-1/2/3/4/5

Bearing induction heating disassembler: In steel mills and wire mills, four column cylindrical roller bearings are usually used to withstand the rolling force of the rolling mill rolls. The inner rings of these bearings are installed on the roll neck with interference fit. Due to rapid wear, heavy loads, and severe pollution, it is necessary to frequently replace the rollers. This inevitably requires dismantling the inner rings and then installing them onto new rollers. Using the SMHC series heater, the inner ring is already heated before the roll neck is heated. You can easily remove the inner ring induction disassembler from the roll neck together. Even for relatively large inner circles, the entire operation process only takes two to three minutes.

Induction heaters can also be used as installation equipment, and fitting the heated bearing inner ring onto the roll neck becomes a truly worry free job. Greatly reduces the time required to disassemble the inner ring of the bearing.
Parameter performance
Only one person can operate it
◆ Increased production time
Ensure that the bearings are reusable

Lide SMHC series induction disassembler technical parameters model:

SMHC series induction disassembler
Product model	SMHC-1	SMHC-2	SMHC-3	SMHC-4	SMHC-5
Power	30KVA	60KVA	100KVA	120KVA	+65310;120KVA
Voltage	380V	380V	380V	380V	380V
Current	78A	157A	264A	315A	＞315A
Frequency	50/60Hz	50/60Hz	50/60Hz	50/60Hz	50/60Hz
Outer diameter of inner circle of workpiece	10-300mm	300-450mm	450-700mm	700-1000mm	＞1000mm
*Large workpiece width	300mm	400mm	500mm	500mm	＞500mm
*Weight of large workpieces	50kg	80kg	150kg	200kg	＞200kg
External electrical control cabinet	have	have	have	have	have
External electrical control cabinet	-	-	have	have	have
*High heating temperature	Max.300℃
Control method	Time control, manual control
Automatic power regulation	have
Automatic demagnetization	have

Note: The above parameters are for reference only. This series of disassemblers requires specific dimensions.

Ningbo Lide Company can provide various types of heaters according to customer requirements, including various types of bearings, gears, impellers, bearing inner rings, retaining rings, sealing rings, couplings, special-shaped workpieces, etc. As long as we provide your requirements, our company can design a satisfactory heater solution and provide you with a convenient way to disassemble and assemble workpieces. The heater products produced by our company have reached and surpassed similar products domestically and internationally. Widely used in mechanical maintenance departments and mechanical and electrical manufacturing units in metallurgy, mining, textile, papermaking, petrochemical, chemical, power, industrial and mining fields.

SMHC seriesHigh power bearing induction disassembler SMHC-1/2/3/4/5