High infusion rate oxygen controller

ProOx 360 Overview

New oxygen control tool

The new ProOx P360 is a convenient tool for personnel engaged in oxygen sensitive work. It makes oxygen control easier.

Physiological control

The control set point can be any value between 0.1-99.9% oxygen. ProOx P360 senses indoor oxygen and injects nitrogen to reduce concentration or oxygen to increase concentration.

Suitable for any room

ProOx P360 is suitable for any semi sealed enclosure and controls oxygen. Its high output makes it an ideal choice for larger chambers, and most chambers can be installed within minutes.

Efficient control

The feedback from the sensor will inform the ProOx P360 high infusion oxygen control tool of the accurate infusion time and volume. No gas is wasted!

Easy to operate

Oxygen quickly reaches the set value and remains at that value indefinitely. Any interference will be immediately detected and corrected. Occasionally check the calibration and do not exhaust the gas. Otherwise, everything will be automatic!

Handle any task

When the ambient air oxygen (21%) is too high or too low, ProOx P360 can provide any other level you need.

When the surrounding atmosphere is not air, ProOx P360 can restore and maintain oxygen equivalent to air.

In places where oxygen consumption or production processes need to be countered, ProOx P360 can maintain oxygen stability to cope with unstable loads.

It can work continuously throughout the year or occasionally as needed. No other oxygen control tool can provide such great value!

specification

Power supply: 12 VDC, 2.5A

Control range: 0.1-99.9% oxygen

Accuracy: O2: ± 1% at constant temperature/pressure, ± 2% throughout the entire temperature range.

Resolution: 0.1%

Oxygen sensors: Provide various application specific sensors.

Gas source: compressed air tank, liquid bottle (from headspace) or generator.

Gas supply: pressurized O2 and/or N2

Gas supply pipeline: 1/4 "ID hose, rated pressure of 40 PSIG.

Gas supply pipeline pressure: 1-40 PSIG

Gas injection rate: 1-140 SCFH

Gas consumption: depends on (1) the size and leakage of the host room, (2) the frequency and duration of opening the room door, and (3) the controlled oxygen level.

Gas supply hose connector: 1/4 "hose hook.

Umbilical cord length: 12 feet (customizable length).

Sensor cable length: 12 feet

Sensor cable diameter: 6mm.

Alarm output: 40dB sound and visible flashing indicator.

Alarm mode: high process, low process, high deviation, low deviation, deviation band.

Weight: 2.2 pounds (controller only)

Size: 2.5 inches high x 8 inches wide x 7 inches deep (controller only)

Sensor operating parameters

Host room temperature: 5-40 ° C (depending on sensor) Host room CO 2: 0.1-20% (depending on sensor) Host room humidity: 0-95% RH. Non condensing