High and low temperature alternating test chamber

High and low temperature alternating test chamberIntroduction:

1. Temperature range: 0 ℃~150 ℃, -20 ℃~150 ℃, -40 ℃~150 ℃, -60 ℃~150 ℃ -70 ℃~150 ℃ -80 ℃~150 ℃. (High temperature -200 ℃)

2. Temperature uniformity: ≤± 2 ℃ (when unloaded)

3. Temperature fluctuation: ± 0.5 ℃ (when unloaded)

4. Temperature deviation: ≤± 2 ℃

5. Heating and cooling rate: 0.7 ℃~1.0 ℃/min

6. Time setting range: 0-9999 hours

7. Power Requirements: AC

8. The equipment casing is made of high-quality A3 steel plate and processed by CNC machine tools. The surface of the casing is sprayed with plastic, and the inner liner is made of high-quality SUS304 stainless steel plate

9. Temperature control instruments are imported from Japan

10. The compressor adopts the French imported "Taikang" brand

11. Heating, cooling, and system independence reduce testing costs, extend lifespan, and decrease failure rates

12. Equipped with a test hole with a diameter of 50mm, it can be used for external testing power or signal lines

13. Equipped with multiple protections such as overpressure and overtemperature
High and low temperature alternating test chamberIt can be used to assess and determine the adaptability of electrical and electronic products to storage and use under high and low temperature environmental conditions. Suitable for schools, scientific research, factories, military and other units. The specific experimental simulation temperature is the temperature rise and fall process between minus 60 ℃ and above 150 ℃.