Henan Xinxiang 100T low-noise square cooling tower manufacturer

Henan Xinxiang 100T low-noise square cooling tower manufacturerProduced by fiberglass cooling tower manufacturers, cross flow square cooling tower manufacturers, low-noise square cooling tower manufacturers, Xinxiang square cooling tower manufacturers, Henan square cooling tower manufacturers, Anyan brand square cooling tower manufacturers, Dongguan Lingxing Cooling Equipment Co., Ltd., factory price direct sales

Guangdong cooling tower manufacturers offer factory price direct sales to major cities across the country, including square cooling towers, cross flow square cooling towers, counter flow square cooling towers, counter flow standard circular cooling towers, high-temperature cooling towers, ultra-low noise cooling towers, fanless cooling towers, sewage cooling towers, etc

Introduction

This series of cross flow square fiberglass cooling towers adopts air intake on both sides and a fan at the top, which allows air to pass through the fillers on both sides of the tower and exchange medium with hot water. The warm air is then discharged outside the tower. The filler adopts a point wave plate with convex points on both sides. The point wave plate is bonded as a whole through the installation head to improve rigidity. The convex points on both sides can also avoid direct dripping, thus improving the ability to form a water film. The tail of the filler is equipped with a water collection measure.

Main Features

1. Space saving and lightweight structure

The high-efficiency heat exchange packing designed specifically for this series of cooling towers has significantly increased its heat exchange area. Compared with the original HBLD series and HBLCD series, its footprint has been greatly reduced. Due to the optimization of structural design using steel structure, the operating weight has also been greatly reduced.

1. Reduce electricity consumption

By using fillers with low ventilation resistance and high-efficiency fiberglass fans designed specifically for cooling towers by Tsinghua University, the motor power used is reduced. The ultra-low noise type uses a smaller motor power, which saves more electricity. It can also be equipped with a dual speed motor according to user requirements to save electricity.

2. Extremely low operating noise

The wing low-noise axial flow fan made of FRP material specially designed for cooling towers by Tsinghua University and the low-noise motor specially designed for cooling towers are used to reduce the operating noise of the cooling tower. The operation noise of the ultra-low noise series cooling tower is lower. Full beard meets environmental protection requirements. If equipped with a dual speed motor, it can reduce noise by 2-3dB (A) during low-speed operation at night. Users who require a dual speed motor should specify their requirements separately when placing an order.

3. Good corrosion resistance

The tower body, water tank and panel are made of FRP material with good corrosion resistance, and light stabilizer is added in gel coat resin, which has good aging resistance and will not change color for a long time. The tower body steel structural parts are processed with hot galvanizing treatment to improve the corrosion resistance of the cooling tower. In normal service life, no additional anti-corrosion is required.

4. Convenient combination

Combination methods can be used to meet the requirements of different working conditions, and users can also decide on combinations based on the site conditions, and adjust the appearance of the cooling tower according to the characteristics of the user's building. If the user's site is very limited, our company can also design according to the user's special requirements to meet their requirements for thermal performance and noise.

6. Easy to maintain

This series of cooling towers is designed as a combination, with adjacent cooling tower air chambers separated from each other. Maintenance, cleaning of fillers, water pipes, and water tanks can be carried out more conveniently under the premise of normal operation of the cooling tower.

Product Structure:

(1) Panel: Made of fiberglass material, with a smooth and beautiful surface, corrosion-resistant, and anti-aging.

(2) Filler: Modified polyvinyl chloride bidirectional point wave plate, with good thermal performance, low airflow resistance, good rigidity, heat resistance of 75 ℃, cold resistance, and flame retardancy.

(3) Fan: The blade material is alloy aluminum plate. The fan has the characteristics of reasonable aerodynamic force, large air volume, high efficiency, low noise, and corrosion resistance.

(4) Motor and reducer: outsourced equipment.

(5) Cloth sink: made of fiberglass material, evenly distributed water, ultra-low noise type with a cover plate to block light, prevent debris from flying in, and reduce splashing sound.

(6) Silencing cover: made of fiberglass material, with an internal cavity type flame-retardant polyvinyl chloride film soundproofing material.

(7) Louvers: made of fiberglass material, waterproof and splash proof, and can ensure even airflow into the tower.

(8) Water tank: made of fiberglass material, used for water collection, equipped with automatic water replenishment facilities, capable of closed-loop circulation and direct water absorption.

(9) Skeleton: It is a folded steel assembly structure with good rigidity, light weight, easy transportation and installation, and hot-dip galvanized for corrosion prevention.

Henan Xinxiang 100T low-noise square cooling tower manufacturerProduced by fiberglass cooling tower manufacturers, cross flow square cooling tower manufacturers, low-noise square cooling tower manufacturers, Xinxiang square cooling tower manufacturers, Henan square cooling tower manufacturers, Anyan brand square cooling tower manufacturers, Dongguan Lingxing Cooling Equipment Co., Ltd., factory price direct sales