- Phone
-
Address
No. 1929 Meili Road, Huaiyin District, Jinan City, Shandong Province
Product Categories
Jinan Sike Testing Technology Co., Ltd
Helium separation membrane material permeability tester
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The helium separation membrane material permeability tester is suitable for qualitative and quantitative determination of the permeability, selectivity, and separation rate of various gases by the separation membrane, including:; Measurement of gas permeability for single and mixed gases using separation membranes; Determination of gas selectivity and separation rate for multi-component separation membranes.
Product Details
Helium separation membrane material permeability tester
Product features
Principle of Differential Pressure Chromatography Testing
International procurement of components to ensure test safety and accuracy of test results
Circulating medium temperature control (optional)
The test chamber is equipped with a temperature sensor to monitor the actual temperature in real-time
Remote maintenance upgrade
Can support DSM laboratory data management system, achieve unified data management, and facilitate data sharing (optional)
technical indicators
Test range: 0.01-2 * E+04 Barrers
Test flow rate: 0-100ml/min (200ml/min, 300ml/min optional)
Test accuracy: 0.01 Barrers
Vacuum precision: 0.1Pa
Test gases: O ₂, N ₂, CO, CO ₂, H ₂, CH ₄, C ₂ H ₄, C ₂ H6, He, etc;
Attention: Oxygen should not be tested together with flammable and explosive gases! Corrosion gas testing is prohibited;
Test pressure difference: 0-10 bar (standard);
System pressure resistance: 16 bar
Temperature control range: 5 ℃ -95 ℃, temperature control accuracy: ± 0.1 ℃ (temperature control device optional)
Test area: Φ 20mm (3.14cm2)
Sample thickness: ≤ 2mm
Sample quantity: 1 piece
Detector sensitivity: ≥ 5000mv.ml/mg or 10000mv.ml/mg
Detector drift: ≤ 0.10mv; noise: ≤ 0.015mv
Carrier gas pressure: 2 bar
Carrier gas types: N ₂, H ₂, He,Ar； Select the carrier gas based on the test gas;
Host size: 320 mm (W) × 625mm (D) × 335mm (H)
Chromatographic size: 590 mm (L) × 480mm (W) × 500mm (H) (standard)
Power supply: AC 220V 50Hz
Helium separation membrane material permeability tester
Standard configuration:
Host, vacuum pump, oil mist filter, vacuum bellows, PCIE card, GC chromatograph, chromatography column, workstation software, pressure reducing valve (oxygen and nitrogen), test gas tube, carrier gas tube, exhaust pipe, communication cable, vacuum sealing grease
Optional parts:
Computer, temperature control device, DSM laboratory data management system.
Note: If there are any changes to the product technical specifications, no further notice will be given. SYSTEST reserves the right of modification and final interpretation!
Similar Product Recommend
