Heat pump dryer manufacturer

The heat pump dryer produced by the heat pump dryer manufacturer uses a heat pump to dehydrate and dry materials and items placed in a relatively enclosed drying room. Water vapor is condensed and discharged from the drying chamber through enclosed dry air, achieving the purpose of dehydration and drying.

The heat pump unit mainly consists of four parts: finned evaporator (external unit), compressor, finned condenser (internal unit), and expansion valve. Through the thermal reciprocating process of evaporation (absorbing heat from the outdoor environment), compression condensation (releasing heat from the indoor drying chamber), throttling and re evaporation, the working fluid continuously completes the evaporation and compression conditions, achieving heat transfer in low-temperature external environments.

In the drying chamber, the refrigerant from the heat pump dryer manufacturer reciprocates in the system under the action of the compressor. In the compressor, it completes the gas pressurization and heating process (temperature can reach 100 degrees Celsius), enters the machine inside, and releases high-temperature heat to heat the air in the drying chamber. At the same time, it cools and transforms into a liquid.

When it runs to an external machine, the liquid quickly absorbs heat and evaporates into gas. At the same time, the temperature can drop to -20 ° C to -30 ° C, so that the air around the heat absorber is not absorbed and the heat is transferred to the refrigerant.

The heat pump dryer manufacturer stated that as a new type of equipment, the heat pump dryer is a necessary device for environmental protection and will eventually replace traditional equipment.