Headphone flame retardant tester

Headphone flame retardant testerMade in accordance with standard clauses such as GB/T31422:6.4.1.12, BS EN 352, BSEN13819:4.13.3, etc., for flame retardant testing of ear cushions and headphones for hearing protectors.
Using a heating steel rod with a length of (300 ± 3) mm and a diameter of 6mm, heat the steel rod at least 50mm from the bottom to (650 ± 20) ℃. The steel rod should be vertical and the temperature at a distance of 20mm from the bottom should be (650 ± 20) ℃. Then, make the bottom close to the surface of the earmuff, keep the steel rod vertical, and apply pressure based on its own weight. Keep any part of the earmuff of the hearing protector in contact for (5 ± 0.5) seconds without burning, and the earmuff should not be flame retardant after removing the heating steel rod.

Technical parameters:

Working power supply 220V AC 50HZ

Test time: 0.1-999.9S ± 0.2S
Heating steel rod: length (300 ± 3) mm, diameter 6mm, applied vertically to the specimen
Box size: approximately 540 * 250 * 880mm (width X depth X height), with an integrated structure of electrical box and test box. The box is made of aluminum and stainless steel
Thermocouple nickel: chromium type, wire diameter 0.5mm
Headphone flame retardant testerofOperation mode: PLC touch screen control operation, one test start is one test cycle, the temperature gauge displays the actual temperature of the steel rod, and real-time temperature collection and storage can be carried out.

Guangzhou Zhilitong Electromechanical Co., Ltd. is a manufacturer of testing instruments with "," and ". It was established in April 1999 and has more than 20 years of production experience and services based in the market; Our main business is product quality testing equipment, specifically non-standard testing instruments for wires and cables, plugs and sockets, electrical accessories, and household appliances that comply with standards such as GB, IEC, BS, UL, VDE, etc.