Hanging dust concentration detection alarm system BM-DT3500

Overview/Principle of Dust Concentration Detection and Alarm System in Factory Environment:

The dust detection system has a simple structure and does not require calibration. A reliable sensor probe is installed in the middle of a specially designed smoke sampling pipeline inside the box. When dust particles pass near the probe, a weak charge signal is induced by the probe and transmitted to the control unit through a special coaxial cable; The signal is processed by the control unit and outputs a linear proportional absolute value of the particle mass content, providing the system with detection output and control functions.

The main applications of the dust concentration detection and alarm system product in the factory environment are:

1) Various flue gas pipelines

2) Workshop dust detection

3) Cyclone dust collector

4) Atmospheric emissions

Factory environment dust concentration detection and alarm system product functions:

This product is based on the non-contact charge induction dust detection technology independently developed by Shenzhen Blue Moon Measurement and Control Technology Company. Taking into account the environmental conditions of multiple dust factories and mines, it achieves rapid and real-time detection of dust conditions in the area through autonomous sampling, and meets the corresponding ventilation and alarm control requirements.

The main features of the dust concentration detection and alarm system in the factory environment are:

1) The sensing unit detects the dust state distributed in the cross-sectional area of the airway, which is not affected by attachments;

2) Simple operation, maintenance free, high reliability, and no cleaning required;

3) The surface of the induction head is attached with wear-resistant PTFE material, and the working life can reach more than 3 years;

4) Built in sampling fan to ensure fast and accurate detection;

5) 7-inch ultra large LED touch screen, with intuitive display and very convenient control operation;

6) External explosion-proof sound and light alarm

7) Output RS485 signal and relay alarm

8) Provide continuous real-time and average display of dust content

9) Provide dust peak capture and retention function

10) Installation method: wall mounted or floor standing

Advantages of the Factory Environment Dust Concentration Detection and Alarm System Product:

1) Higher reliability than traditional frictional/optical sensing devices

2) More effective control than traditional dust detectors

3) Protect downstream equipment and improve equipment service life

4) Avoid unnecessary downtime and improve equipment efficiency

5) Prevent product loss and avoid cleaning

6) It can detect moisture, conductivity and other dust well

Technical parameters of the dust concentration detection and alarm system in the factory environment:

Detection range: 0~100mg/m3, 0~500mg/m3, 0~1000mg/m3, 0~5000mg/m3

Detection resolution: 0.1% of the measuring range

Detection accuracy: 5% FS

Power supply: 220VAC

Protection level: IP54

Installation method: wall mounted or floor standing

Box material: Iron (standard), stainless steel outer box can also be customized

Probe protection material: Teflon (standard), other application requirements can be selected

Maximum temperature tolerance of induction probe: 120 ℃ (standard)

Conventional: No special requirements, not affected by vibration during use.

For more product information, please call/