Handheld Line Width and Distance Tester D300B

1. Product Introduction:

Handheld Line Width and Distance Tester D300BIt is an optical measuring instrument used to achieve precision detection. It uses a light source to illuminate the circuit board under test, and after optical amplification and camera photoelectric signal conversion, the image signal is transmitted to the computer to display a clear image interface. Then, the image measurement area is directly selected by the mouse for edge detection and return of measurement results. It is mainly designed to detect the upper and lower width of the inner and outer semi-finished products of printed circuit boards after development and etching (before applying green oil), basically meeting the line width detection of finished and semi-finished products in various thicknesses of PCB boards on the market. It adopts domestic and foreign technologies and spare parts, and is equipped with clear and easy to learn operating software with a clear interface.

2. Product Features:

1) Measurement of line width above and below the selected area: measure the width of burrs and copper edges within the selected area;

2) Box menu line width measurement: measure the width between two lines in the selected area of the box;

3) Frame selection line width measurement: measure the width of the copper edge within the frame selection area;

4) Frame selection line width measurement: measure the width of burrs within the frame selection area;

5) Box selection 13 line width measurement: measure the width between the upper copper edge and the lower burr in the selected area;

6) Box selection 24 line width measurement: measure the width between the upper copper edge and the lower burr within the selected area;

7) Manual online width measurement: manually measure the width of the copper edge;

8) Manual offline width measurement: manually measure the width of burrs;

9) Blind hole measurement: measure the diameter between the copper edge and the burr in the selected area of the measurement frame;

10) Line circle measurement: measuring the shortest distance from a line to a circle;

11) Gap measurement: measure the width of the gap;

12) Manual distance measurement: manually measure the distance between two points;

13) Point line distance measurement: manually measure the shortest distance from a point to a line;

14) Manual circular hole measurement: manually measure the diameter of a circle;

3. Application scope:

Handheld Line Width and Distance Tester D300BMainly used for detecting the upper and lower width and area, angle, circle diameter, center distance, etc. of the inner and outer semi-finished products of PCB printed circuit boards after development and etching (before applying green oil). Can be extended to micro size measurement of other electronic components.

4. Product features:

1) Handheld design, easy to move, not affected by desktop throat depth imaging, can measure large-sized products.

2) High sensitivity color CCD, with clear imaging quality.

3) 10mm lens focusing device for fine adjustment of focal length.

4) Red light LD positioning can quickly determine the measurement area.

5) The dedicated LED ring light source is designed and continuously adjustable to meet multiple measurement modes.

6) The magnification is adjustable from 70 × to 450 ×.

7) The software automatically searches for edges, and the measurement of upper and lower line widths can be boxed, making the measurement faster and more accurate.

8) Administrator/operator mode, convenient for management.

9) Combining automatic and manual saving of measurement images, quickly export measurement data to Excel and Word documents.

10) The units of measurement results can be selected and converted.

11) SPC control.

12) The software is easy to operate with three mouse buttons.

13) Chinese, English, and Traditional Chinese language versions

5. Technical indicators and parameters