HY-A/B high-capacity speed regulating oscillator

OneHY-A/BLarge capacity speed regulating oscillatorIntroduction:

HY-A/BLarge capacity speed regulating oscillatorIt is an ideal tool for laboratories in various colleges and universities, environmental protection, health, epidemic prevention, petroleum, metallurgy, chemical, grain and other units, greatly improving the work efficiency of laboratory personnel. It can be used for solution analysis of containers such as test tubes, separating funnels, and triangular flasks, solving the problem of other oscillators moving during operation without noise. It also has a timing device added, which is convenient for laboratory personnel.

IIHY-A/BLarge capacity speed regulating oscillatorTechnical parameters:

1. Oscillation frequency: starting -260 times/minute (stepless speed regulation)
2. Vibration amplitude: 20mm
3. Working mode: reciprocating or rotating
4. Single phase AC power supply: 220V ± 10V 50HZ
5. Timing range: 0-120 minutes
6. Motor power: 120W
7. Working size: 800 × 600mm

IIIHY-A/BLarge capacity speed regulating oscillatorusage method:

When using this instrument, first connect the power supply, then place the volumetric flask that needs to oscillate the solution into the spring fixture, cover the mouth with a rubber stopper, turn on the timer, select the time or position that you need to control, and then turn on the power switch to start working. When working, please choose the oscillation speed that you are satisfied with. The speed control switch is controlled by the timer, and it should start at a low speed when starting up.

4HY-A/BLarge capacity speed regulating oscillatormatters needing attention:

To ensure safety, please connect the ground wire (i.e. three pin plug) when using
When not working, the power should be turned off and disconnected to prevent accidents.
3. The instrument should be kept clean and dry, and it is strictly prohibited to use a metal hammer to strike it.