-
E-mail
2851676109@qq.com
-
Phone
13382303480
-
Address
No. 19 Runlou Road, Dailou Concentrated Industrial Zone, Huai'an City, Jiangsu Province
Product Categories
Jiangsu Hongqi Automation Equipment Co., Ltd
HQLUGBD Integrated Intelligent Vortex Flow Meter with Temperature and Pressure Compensation
NegotiableUpdate on 06/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Brief Introduction: HQLUGB-D Integrated Intelligent Vortex Flow Meter with Temperature and Pressure Compensation is a new design concept that integrates temperature, pressure, and flow signals. Through an intelligent digital processor, the three signals are mixed and processed to output a compensated standard flow rate
Product Details
Brief introduction:
HQLUGB-D temperature and pressure compensation integrated intelligent vortex flowmeter is designed with a new concept, integrating temperature, pressure, and flow signals. Through an intelligent digital processor, the three signals are mixed and processed to output a compensated standard flow rate, thus achieving temperature and pressure compensation for gas and steam. Due to the adoption of an intelligent integrated design concept, the LUGB temperature and pressure compensation intelligent vortex street has the characteristics of compact structure, easy installation, use, and maintenance.
HQLUGB-D Integrated Intelligent Vortex Flow Meter with Temperature and Pressure Compensation
1、 Overview of HQLUGB-D Integrated Intelligent Vortex Flow Meter with Temperature and Pressure Compensation
HQLUGB-D temperature and pressure compensation integrated intelligent vortex flowmeter is designed with a new concept, integrating temperature, pressure, and flow signals. Through an intelligent digital processor, the three signals are mixed and processed to output a compensated standard flow rate, thus achieving temperature and pressure compensation for gas and steam. Due to the adoption of an intelligent integrated design concept, the LUGB temperature and pressure compensation intelligent vortex street has the characteristics of compact structure, easy installation, use, and maintenance.
2、 Functional characteristics of integrated vortex flowmeter with temperature and pressure compensation
The body also integrates temperature and pressure compensation functions, which can measure the standard volume flow rate or standard mass flow rate of fluids.
Fully intelligent and digital circuit design, capable of automatically compensating for measured fluid density or standard condition volume calculation.
The new digital filtering and correction functions make flow measurement more accurate and reliable.
The battery powered type can work continuously for more than two years without the need for an external power source.
New dot matrix Chinese character LCD display, more convenient to use and operate.
3、 Technical parameters of temperature pressure compensation integrated vortex flowmeter
Measurement medium: liquid, gas, vapor
Medium viscosity: less than 10cp
Medium temperature: -50 ℃ -+400 ℃
Body material: 1Cr18Ni9Ti (supplied under other material agreements)
Sensor sealing: graphite gasket (special according to requirements)
Environmental temperature: -30 ℃ -+80 ℃ (depending on specific requirements)
Nominal diameter:
Pipeline type: DN15- DN300;
Insertion type: DN200-2000mm
Measurement accuracy:
Liquid: ± 1.0% of measured value (special)
Gas: ± 1.5% of measured value
Range ratio: 10:1
Pressure rating: PN25, PN40 (high pressure can be specially manufactured)
Connection method:
Clamping type DN15-DN300
Flange type DN15-DN300.
Plug in DN200-DN2000
Explosion proof form:
Explosion proof Ex d Ⅱ BT4-T6
Intrinsically safe Ex ia Ⅱ CT4-T6
Protection level: IP67
Converter housing: die cast aluminum, painted
Supply voltage: 12-36VDC or 3.6V battery
Output signal: two-wire 4-20mA current output
On site display: programmable to display instantaneous flow and cumulative flow
Communication method: RS485 communication
Product details of temperature pressure compensation integrated vortex flowmeter
4、 Selection Table of Integrated Vortex Flow Meter with Temperature and Pressure Compensation
HQLUGB/E series vortex flowmeter selection table
5、 Comparison Table for Selection of Caliber and Flow Range of Integrated Vortex Flow Meter with Temperature and Pressure Compensation
|
Type table
|
Say it bright
|
|||||||||
|
HQLU
|
|
Vortex flowmeter
|
||||||||
|
G
|
|
sensor
|
||||||||
|
detection
way
|
|
B
|
|
piezoelectric sensor
|
||||||
|
E
|
|
Capacitive sensor
|
||||||||
|
Connection method
|
|
1
|
Only applicable to full tube type
|
flange type
|
||||||
|
2
|
Only applicable to full tube type
|
Flange card type
|
||||||||
|
3
|
Only applicable to insertion type
|
Easy insertion type
|
||||||||
|
4
|
Only applicable to insertion type
|
Ball valve insertion type
|
||||||||
|
Measurement medium
|
|
2
|
|
|
liquid
|
|||||
|
3
|
|
|
gas
|
|||||||
|
4
|
|
|
steam
|
|||||||
|
Nominal Diameter
|
|
02
…
30
|
|
DN25
... Unit: mm
DN300
|
||||||
|
Usage environment
|
P
|
|
Common
|
|||||||
|
B
|
|
Explosion proof type
|
||||||||
|
output signal
|
|
1
|
|
Pulse output
|
||||||
|
2
|
|
4-20mA current output, LCD display
|
||||||||
|
3
|
|
rs-485 communication
|
||||||||
|
4
|
|
Battery powered, without temperature or pressure compensation
|
||||||||
|
model selection
describe
|
For example: LUGE2405-P2 full tube capacitive vortex flowmeter, flange card type connection, medium is steam
The instrument has a diameter of DN50 and outputs a normal 4-20mA current signal
|
|||||||||
5、 Comparison Table for Selection of Caliber and Flow Range of Integrated Vortex Flow Meter with Temperature and Pressure Compensation
