HQBS intelligent target flowmeter

HQ-BS Target Intelligent Flow Meter

Overview of HQ-BS Target Intelligent Flow Meter

The HQ-BS target intelligent flowmeter adopts the latest capacitive force sensor as the measuring and sensitive transmission element, and applies the latest digital technology and microelectronics technology. It is an intelligent flowmeter suitable for measuring fluids and gases with high viscosity, low Reynolds number, and containing small particles. The use of capacitive force sensors is the key to achieving high precision and stability in this product. Target based intelligent flow meters not only have the characteristics of traditional orifice plates, vortex street flow meters, and other flow meters without movable parts, but also have measurement accuracy comparable to volumetric flow meters. In addition to their unique anti dry and anti impurity performance, they can replace conventional flow meters and conventional fluid flow measurement, especially in flow measurement conditions such as high viscosity, easy blockage, high temperature, high pressure, and strong corrosion. Currently, they have been widely used in flow measurement in various fields such as steel, oil, natural gas, electricity, papermaking, energy, food, and environmental protection.

Applicable range of HQ-BS target intelligent flowmeter

Suitable for various nominal diameters, ranging from DN15~N2000mm to larger;

Suitable for high and low temperature media: from -50 ℃ to+260 ℃;

Suitable for low, medium, and high pressure conditions: from 0 to 42MPa; (Gauge pressure)

Characteristics of HQ-BS Target Intelligent Flow Meter Product

1. No movable parts, reduced sealing surface, greatly reducing leakage rate, convenient for installation and daily maintenance;

2. Wide measurement range, the largest measurement range can reach 20:1 (liquid) or 10:1 (gas);

3. Accurate measurement and high precision, flange type can reach 0.2% (liquid) or 0.5% (gas);

4. Extremely high sensitivity, capable of measuring ultra-low flow rates, capable of measuring low flow rates of 0.08m/s, and electromagnetic flow meters of 0.5m/s;

5. Good repeatability, generally ranging from 0.05% to 0.08%, with optional small signal removal, non-linear correction, and selectable filtering time;

6. The pressure loss is small, and the small diameter is only about 1/2 △ P of the standard orifice plate; The pressure loss of DN100 caliber and above has significantly decreased;

7. Calibration is convenient. In addition to using standard equipment for calibration, dry calibration methods can also be used, such as the weight hanging method, which can be completed with a single button operation;

8. The flow range can be changed by replacing the blocking components according to actual needs, and the online detachable insertion structure can achieve non-stop production, continuous flow maintenance or replacement;

9. Low power battery on-site display, capable of online direct reading of indication values. The display screen can simultaneously read instantaneous flow cumulative flow and percentage bar chart, and can switch to display compensation temperature and compensation pressure indication values;

10. Strong anti-interference and anti impurity capabilities, multiple output forms, able to transmit various parameters remotely, and can be used without mixing heat