HNMK-8C environmentally friendly coke drum testing machine

When the coke Mikum drum testing machine is running, the lifting plate inside the drum is used to lift the coke to a high place. After exceeding 90 degrees of the drum, the material begins to fall freely. During friction and collision with the drum and between the coke, cracks and breakage occur. Then, based on the screening weight, the crushing strength and wear resistance strength of the coke are calculated.
Overview of Coke Micam Drum Testing Machine:
The HNMK-8 Mikum drum machine produced by Hebi Huaneng Technology Co., Ltd. is designed and manufactured according to the technical requirements specified in GB/T2006-94 "Measurement Method for Mechanical Strength of Metallurgical Coke". Used to determine the mechanical strength of coke, as well as the crush strength and abrasion resistance of coke samples. The company also supplies sintering and pellet drums, as well as equipment for measuring the drum index and wear resistance index of sintered ore and pellet ore. Used to test the impact resistance and wear resistance of sintered ore and pellet ore. It is sintered ore and pellet used in blast furnaces to test the mechanical strength at room temperature.
When the coke Mikum drum testing machine is running, the lifting plate inside the drum is used to lift the coke to a high place. After exceeding 90 degrees of the drum, the material begins to fall freely. During friction and collision with the drum and between the coke, cracks and breakage occur. Then, based on the screening weight, the crushing strength and wear resistance strength of the coke are calculated.
There are three models of this machine, the one without a serial number is the regular type, the A type is the enclosed type, and the B type, which can be selected by users.
Can be matched with pre drum grouping mechanical screen and post drum mechanical screen. Hand sifting.
Technical parameters of coke Mikum drum testing machine:
Drum speed: 25r/min
Preset RPM: 100 RPM/4 minutes ± 10 seconds
Motor power: 1.5/2.2 kw
Inner diameter x length of drum: 1000x1000mm
Voltage: 380V
Coke drum grouping mechanical screen:
Mainly used for the determination of various compositions (25-40mm, 40-60mm, 60-80mm,>80mm) and coke powder content in metallurgical coking. It can replace manual screening, achieving the ideal equipment of reducing labor intensity, improving the detection accuracy of coke powder content, and eliminating human errors. The mechanical screen adopts optimized design, making its structure compact, easy to operate, and reliable in operation. Its technical performance has met the requirements of GB/T2005-94.
Main technical specifications of the grouping mechanical screen in front of the coke drum:
Screen plate specifications (mm) 80x80, 60x60, 40x40, 25x25
Number of floors: 4
Screen inclination angle: 11.5
Excitation amplitude 6-8mm
Motor power 0.75kw
Machine weight 600kg
Dimensions 2300x1340x1310mm
Mechanical sieve after coke drum:
Suitable for mechanical strength determination of metallurgical coke and cast coke, it can replace hand screening without manual perforation, which can reduce the labor intensity of operators and improve the accuracy and comparability of the determination. It has a compact structure, simple operation, convenient use, and reliable operation. Automatic time control ensures reliable screening timing. Automated control of the entire work process ensures smooth and reliable operation, greatly improving work efficiency. It is the equipment used by the quality inspection department for screening.
Main specifications of the mechanical screen for grouping in front of the coke drum:
Model SHG-07,
Motor power of 1.5 kW,
Swing angle: 40 ° -45 °,
A screening time of 45 seconds,
Screen plate size: The upper sieve holes are 40mm or 25mm,
The lower layer is 10mm
Dimensions 1540x1150x1200mm, total weight 340kg