HDA4745 series HYDAC pressure sensor produced in Germany

HDA4745 series HYDAC pressure sensor produced in Germany

　　Hydac pressure sensorMade in Germany, the quality is very good and safe to use. Sales experience in European and American industrial products, direct sales supply of HYDAC's full range of sensors, filter cartridges, and filters. A larger quantity is better at a higher price.

The use of HYDAC pressure sensor in Germany:

1. Directly used for measuring various pressures: air pressure, water pressure, hydraulic pressure (including water pressure), various blood pressure measurements for people in daily life, etc;

2. Pressure sensors are used in cars, some high-end motorcycles, and almost all internal combustion engines;

3. Liquid level gauge: Most of the on-site gauges used for measuring liquid levels are also pressure sensors;

4. Most electronic weighing scales and truck scales also rely on pressure sensors for their weighing signals.

5. Acceleration measurement in aviation and aerospace also uses pressure sensors.

The environment for HYDAC pressure sensors requires different devices. Suitable for hook scales, electromechanical combination scales, hopper scales, material tank scales, packaging scales, ingredient weighing control, and testing machine forces

Monitoring and measurement require different types of weighing sensors.

HYDAC pressure sensors are now required to be equipped with weighing sensors in many devices. This is because the characteristics of sensors are very suitable for the range use of these devices. From the perspective of structure

Look, it's quite compact and very easy to install. Design different precision measurement methods according to different needs. In terms of application, not only can tension or pressure be measured, but also

And stability can be well guaranteed. In terms of component selection, alloy steel has also been chosen. Even nickel plating on the surface is to better ensure the use and longevity of the product

Fate.

Different types of weighing sensors not only have different principles, but also differences in wiring methods;; Generally speaking, it is divided into two types: four line and six line. According to different hardware requirements

Make corresponding short-term connections. Typical sensors use a six wire connection method. When switching to a four wire wiring method, the two compensation wires are removed. Due to the weighing module

The line loss between sensors, in fact, the voltage received by the sensors will be less than the supply voltage. So we need a compensating wire to make up for this difference and ensure the accuracy of the data

Accuracy. When using this instrument, it is necessary to ensure the appropriate distance between the sensor and the weighing module, and minimize voltage loss as much as possible, in order to ensure that the measurement results are accurate and without significant errors

of

How to integrate HYDAC pressure sensors into equipment or test benches? Different sensors have different specifications and mechanical and electronic connections. However, modern torque sensors are more

The easier it is to integrate, the more it meets the stringent requirements of modern industry.

T40B is a flange type torque sensor mainly used for bench testing, with a linear error of up to 0.03% including hysteresis. This sensor has four electrical interfaces:

HYDAC pressure sensorIt is a 7-pin 30V power interface and a low resistance path through shunt. It provides frequency output.

The pressure sensor is an 8-pin plug that provides multiple settings based on different sensors, providing speed measurement and speed signals with reference pulses.

The pressure sensor is similar to the 7-pin plug of interface 1 and can provide voltage output;

The Hedeke pressure sensor is a 16 pin plug that serves as a torque measurement channel (TMC) and is connected to HBM TIM series products through an interface. Provide additional multiple outputs,

Including scaling, filtering, and zeroing - device communication can also be achieved through CAN or Ethernet based fieldbus connections, such as PROFNET or EtherCAT.

The rated operating voltage of the sensor is 18-30 V, which is isolated from the output signal pin to reduce noise interference. A split signal of approximately 50% of the rated torque is transmitted by T40B torque

Device generated.

The X3 plug of TIM40 is the main connector of port 4 of T40B, providing shielding and power supply for torque signals. Afterwards, X4 and X5 are frequency and analog outputs. All output letters

The numbers are highly adjustable and can be well controlled, including the naming of signals and the number of decimal points in the signals.HDA4745 series HYDAC pressure sensor produced in Germany

贺德克产品型号： HDA4400-、HDA4444-、HDA4445-、HDA3744-、HDA3840-、HDA3844-、HDA3845-、HDA4700-、HDA4744-、HDA4745-、HDA3800-、EDS210-、EDS300-、EDS510-、EDS601-、EDS344-、EDS345-、EDS346-、EDS348-、EDS505-、EDS1700-、EDS1791-、EDS3000-、EDS3346-、EDS3348-、ETS300-、ETS4000-、ETS5000-、ETS326-、ETS328-、ETS386-、ETS388-、ETS1701-、ETS4144-、EVS3100-、EVS3110-、HMG1000-、HMG2020-、

VM2D-、0160D-、0330D-、0660D-、KHM-、KHP-、1300R-、1700R-、VD5C-、CETS1701-、HDA5001-、EHS2044-、HED-、ZBE，ENS 311P-8-0410-000-K、EDS1791-N-400-000、EDS 3446-2-400-000、EDS 3446-2-0400-000+ZBE08、ETS1701-100-000、EDS 348-5-250-000、0850R020BN4HC、0660D010BN4HC、0850R005BN3HC、0300D005BN3HC、0660R010BN3HC、0500D010BH/HC、HDA4445-A-016-000+ZBE01、EDS348-5-250-000、EDS345-1-016-000、1300R005BN4HC、1300R010BN4HC、0330D010BN4HC、EDS344-3-250-002 带插头 (zbe03 或 zbe02) 、ETS1701-100-000+TFP100+S.S、EDS344-3-350-000+ZBE03、EDS 344-3-400-000、EDS 3446-2-0250-000、EDS 3496-2-0250-000、EDS344-2-16-000+ZBE02+ZBM300、HDA4744-A-250-000+ZBE03、EDS346-2-040+ZBE06+ZBM300、EDS346-2-040+ZBE06+ZBM300、EDS344-3-400-000+ZBE02、EDS 3446-3-0400-000、HDA 4745-A-250-000、EDS 3346-2-0016-000-F1+ZBE06-05、ETS388-5-150+TFP100+S.S+ZBE08+ZBM300、ETS 388-5-150-000+ TFP100+S.S+ZBE08+ZBM300