HCH-M14-C43T-HL Hall Speed Sensor

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The HCH-M14-C43T-HL Hall Speed Sensor is a small enclosed bidirectional sensor with advantages such as stable performance, low power consumption, strong anti-interference ability, and wide temperature range. The speed sensor contains two sensing elements that can be used for direction identification or as a one-way dual channel signal output. When in use, simply stick a small magnetic steel on the rotating object, fix the sensor within a certain distance of the magnetic steel, and align it with the S pole of the magnetic steel for measurement. When used for directional identification, the sensor has installation requirements. According to the external marking pit, ensure that the two elements sense successively to generate

Product Details

HCH-M14-C43T-HL Hall Speed Sensor

HCH-M14-C43T-HL Hall Speed SensorIt is a small enclosed bidirectional sensor with advantages such as stable performance, low power consumption, strong anti-interference ability, and wide temperature range for use. The speed sensor contains two sensing elements that can be used for direction identification or as a one-way dual channel signal output. When in use, simply stick a small magnetic steel on the rotating object, fix the sensor within a certain distance of the magnetic steel, and align it with the S pole of the magnetic steel for measurement. When used for directional identification, there are installation requirements for the sensor. According to the external marking pit, ensure that the two elements are sensed sequentially to generate a phase difference.

Measurement range: 1Hz~45KHz

Output mode: Low level effective, driving capability not less than 15mA per channel

Output signal: waveform: rectangular wave

Amplitude: High level close to the power supply, low level ≤ 0.5V

Power supply: (4.5~24) VDC, (12~18) Vz/uivalue

Number of pulses per revolution: corresponding to the number of attached magnetic sheets*

Detection distance: ≤ 4mm

Normal working conditions

Temperature: -20 ℃~+80 ℃

Relative humidity: not exceeding 85%

Atmospheric pressure: 86KPa~106KPa

There are no explosive or corrosive gases around

Appearance and opening size

Total length: L+23.9 (excluding output wires)

External thread: M16 × 1

Effective length of thread: L, L=50, 75, 100mm

Output wire: 2mHall speed sensor is a small enclosed bidirectional sensor with advantages such as stable performance, low power consumption, strong anti-interference ability, and wide temperature range. The speed sensor contains two sensing elements that can be used for direction identification or as a one-way dual channel signal output. When in use, simply stick a small magnetic steel on the rotating object, fix the sensor within a certain distance of the magnetic steel, and align it with the S pole of the magnetic steel for measurement. When used for directional identification, there are installation requirements for the sensor. According to the external marking pit, ensure that the two elements are sensed sequentially to generate a phase difference.