Gypsum putty structural adhesive sealant dual speed vacuum mixer

，

This machine is equipped with a vacuum device on the basis of the original small-scale mixer. An important device used for stirring paste like objects such as sealant, structural adhesive, gypsum, etc. Due to its completion in a vacuum state, the test sample can achieve bubble free, void free and other forms; Therefore, it can improve the filling and density of the material.

2、 Main technical performance indicators:

Power supply voltage:220Vcommunication 50HZ

merit Rate:400W

Effective volume500ml

Vacuum degree less than or equal to0.095Mpa

Weight:25Kg

Vibration mode: infinitely adjustable

Dimensions: Length*wide*tall350*320*580

3、 Installation method:

ZKJ3The type is a desktop structure. After unpacking and counting, connect the power supply and follow the instructions for use. Connect the power cord of the vacuum pump to the socket behind the host box, and connect the randomly attached plastic exhaust pipe to the vacuum pump and the host.

4、 Usage:

1Connect the power before use220VRandomly have one power cord.

2First, set the mixing time, then manually mix the material in the mixing tank to a paste, connect the mixing tank with the mixing sleeve seat, and gently push it into the tank. Hold the mixing drum in hand, tighten the air release needle valve, press the vacuum switch and mixing switch. At this time, the working state is vacuum mixing. You can release your hand and set the mixing time by yourself.

3After mixing is complete, turn off the power switch, hold the mixing tank in hand, release the air release needle valve, and then remove it.

5、 Attention:

1Before using various types of mixers, it is necessary to carefully read the user manual, understand their usage steps and precautions, and prevent unnecessary damage to the equipment.

2Vacuum pumps are strictly prohibited from operating without load to avoid affecting the service life of the machine.

3If the machine has a malfunction, please find an experienced professional to repair it.

4Regularly inspect the safety grounding of the machine. Good grounding should be maintained between the protective grounding in the power grid plug switch and the equipment casing.

5After use, clean the material drum and mixing blades in a timely manner for future use