Glass kiln centrifugal fan

NegotiableUpdate on 04/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Description: Xima Fan can produce fans that meet the needs of glass production lines, mainly used for cooling and lowering the temperature outside the kiln. Generally, low-pressure high air volume series fans are selected, and the common ones are the 4-72 series centrifugal fans. It can also provide fans for glass kiln flue gas waste heat recovery and power generation, desulfurization fans, and de sales fans. Click to consult for more information. 1. Fan Form: The air volume of the 4-72 type centrifugal fan is 1199-435813 ㎥/h, the air pressure is 778-6761Pa, and the power is 1.1kw-110kw. Among the 4-72 type fans: No.2

Product Details

玻璃窑生产线

Xima Fan can produce fans that meet the needs of glass production lines, mainly used for cooling and lowering the temperature outside the kiln. Generally, low-pressure high air volume series fans are selected, and common ones include4-72 series centrifugal fanWe can also provide fans for the recovery of waste heat from glass kiln flue gas for power generation, desulfurization fans, and desulfurization fans,To learn more, click to consult

1、 Fan form:

The air volume of the 4-72 centrifugal fan is 1199-435813 ㎥/h, the air pressure is 778-6761Pa, and the power is 1.1kw-110kw. In the 4-72 fan, No. 2.8-6A adopts direct motor transmission, No. 6-12C adopts belt pulley transmission, No. 6-12D adopts coupling transmission, and No. 16-20B adopts cantilever support, with the belt pulley between two bearings.

2、 Details introduction:

The 4-72 type high flow centrifugal fan is one of the earliest and most commonly used fans in China. Suitable for conveying clean air or lightweight materials at room temperature, it is commonly used in industrial kilns for air supply, transportation of lightweight particles/powders/debris/fibers, air drying/cooling of materials, ventilation and smoke exhaust, etc. There must be no viscous substances inside the gas, and the dust and hard particles contained should be greater than 150mg/square meter, and the gas temperature should not exceed 80 ℃.

3、 Product features:

1. Under the condition of meeting pressure requirements, it can output a large gas flow rate with low noise.

2. By matching different pulley diameters, the fan speed can be flexibly set to operate at the highest efficiency point, reducing energy waste.
3. Provide motor sliding guide rails for easy tensioning of belts, reducing energy loss caused by belt looseness.
4. When the airflow resistance increases, the motor load will automatically decrease without burning out the motor.
5. When using an integral bracket, installation is very simple and requires little support from professional technicians.
6. After production is completed, all have undergone operational testing and vibration value detection, ensuring reliable operation.