- Phone
-
Address
702, Block A, Singularity Center, No.1 Energy East Road, Shahe Town, Changping District, Beijing
Product Categories
Beijing Qianming Gene Technology Co., Ltd
Glass bead sterilizer SafeGB-300
NegotiableUpdate on 06/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The SafeGB-300 glass bead sterilizer is a product that uses heated high-temperature glass beads to rapidly sterilize small experimental equipment. Can be used for pliers, scissors, tweezers, knives, needles, inoculation rings and needles, etc., commonly used in scientific research laboratories.
Product Details
Product Features:
1. Small size, light weight, easy operation, and long service life.
The container containing high-temperature sterilization beads can be heated to a maximum temperature of around 300 ℃.
3. Randomly configure a glass bead with a diameter of 1.5-2.0 mm.
4. The appearance design is compact and compact, with real-time digital temperature display, and can be placed in an ultra clean workbench for use.
*5. Stainless steel inner container with built-in high-performance heating elements, high-precision temperature controller, and over temperature protection.
Notes:
1. Fill the container with clean and dry glass sterilization beads, with a depth standard of about 2cm below the edge of the stainless steel container. Do not use other fillers or liquids in contact with the container.
2. Turn on the power switch, it takes a certain amount of time for the container temperature to reach the set temperature, and it will maintain the internal temperature when the power is turned on.
3. Do not touch glass sterilization beads or containers before cooling! Avoid scalding!
4. Insert the dry equipment that needs to be disinfected into the glass sterilization beads as much as possible for at least 10 seconds.
5. After use, please turn off the power switch and cover the lid to prevent dust and foreign objects.
6. Glass sterilization beads must be cleaned at least once a week, and when removing the glass beads, be sure to wait until the instrument has completely cooled down.
7. Strictly clean and dry before reloading for use. (Take out the glass beads and wash them with mild soap solution. After rinsing, dry them.)
Product Parameters:
Model: SafeGB-300
Temperature adjustment range: 100 ℃~300 ℃
Temperature control accuracy: ± 5 ℃
Heating time to maximum temperature: ≤ 25 minutes
Container dimensions (diameter x depth): Φ 40x80mm
Glass bead capacity: 300g
Metal cover: stainless steel
Insulation material: environmentally friendly mineral wool
Input voltage: AC220/AC110V, 50/60Hz
Power: 120W
Fuse: 250V, 2A/3A, Ø 5 × 20
Dimensions: W.130xD.150xH.200mm
Net weight: 2kgs
