German P+F Single Loop Value Encoder ESS58-PZ

German P+F Single Loop Value Encoder ESS58-PZ：

Detection type: photoelectric sampling

Equipment type: Single coil value encoder

Functional safety related parameters

MTTFd 130 a

Task Time (TM) 20 a

L10 1,9 E+11 at 6000 rpm and 20/40 N axial/radial axis load

Diagnostic coverage rate (DC) 0%

Electrical Technical Specifications

Working voltage 10 .. 30 V DC ， Safe current isolation, compliant with EN 50178 standard

High power consumption of 3 W

Linearity ± 0.5 LSB (12 bits), ± 2 LSB (16 bits)

Output code binary code

The code course (counting direction) is programmable,

Clockwise increment (clockwise rotation, code course increment)

Clockwise decrease (clockwise rotation, code course decreases)

interface

Interface type Ethernet Powerlink

resolution

Up to 16 bits per cycle

The overall solution can reach 16 bits

Transmission rate of 100 MBit/s

connection

Connector Ethernet: 2 sockets M12 x 1, 4-pin, D code

Power supply: 1 plug M12 x 1, 5 pins, size A

meet the standard

Protection level DIN EN 60529,

Shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)

Shell side: IP65

Climate test DIN EN 60068-2-3, no condensation

Emission interference EN 61000-6-4:2007

Immunity EN 61000-6-2:2005

Impact resistance DIN EN 60068-2-27100 g, 6 ms

Vibration resistance DIN EN 60068-2-6, 10 g, 10... 2000 Hz

Certification and Credentials

UL certification, cULus certification, general purpose, Class 2 power supply

When the rated voltage of CCC certification is ≤ 36 V, the product does not require CCC certification/marking

environmental conditions

Working temperature -40 degrees Celsius .. 79 °C (-40 ... 174,2 °F)

Storage temperature -40 degrees Celsius .. 85 °C (-40 ... 185 °F)

Relative humidity 98%, no condensation

Mechanical Specifications

Material shell: Aluminum with powder coating

Flange: Aluminum

Shaft: Stainless steel

Mass approximately 550 g

Rotating speed of 12000 min-1

Inertia moment 30 gcm2

Initial torque ≤ 3 Ncm (models without shaft seals)

The tightening torque of the fastening screw is 1.8 Nm

Axis load

Angle offset ± 0.9 °

Axial offset static: ± 0.3 mm, dynamic: ± 0.1 mm

Radial offset static: ± 0.5 mm, dynamic: ± 0.2 mm

German P+F Single Loop Value Encoder ESS58-PZ