German KRACHT electromagnetic directional valve WL4 sold in Shanghai

The directional control valve WL 4/06 consists of a housing (1), a control slide valve (5) with two centering springs (4), and cylindrical operating solenoid valves (2, 3).

The three position directional valve is equipped with two solenoid valves and two springs. The two position directional valve has one solenoid valve and one return spring or two solenoid valves and a stop component. The operating solenoid valve is a DC solenoid valve. For AC power supply, the solenoid valve is equipped with a rectifier, which is directly integrated into the connector. The plug connectors (6, 7) can be rotated 90 degrees. Loosen the fixing nut (8), and the solenoid valve can be rotated or replaced freely within a 360 ° range. This makes it possible to replace the operating coil without opening the pressure sealed space. If the solenoid valve or power supply fails, as long as the pressure at the T port does not exceed 25 bar, the valve core can be repositioned by manual override (9). The basic surface treatment of the valve housing (1) is phosphate coating, and the operating solenoid valves (2, 3) are galvanized.

German KRACHT electromagnetic directional valve WL4 sold in Shanghai

Nominal size 6

The maximum flow rate is shown in the p-Q characteristic

Maximum work pressure

At ports P, A, and B, the pressure is 4641 pounds per square inch (320 bar)

Maximum work pressure

At port T 3046 pounds per square inch (210 bar)

Pressure loss is reflected in the Δ p-Q characteristic

Hydraulic oil DIN 51254/25 hydraulic oil

Provide other hydraulic oils as requested

Fluid temperature range (NBR) -22+176 degrees Fahrenheit (-30...+80 degrees Celsius)

Environmental temperature range+122 degrees Fahrenheit (...+50 degrees Celsius)

Viscosity range 98... 1840 SUS (20-400 square millimeters per second)

Maximum fluidity

Compliant with ISO 4406 pollution level 18/15.

Therefore, we recommend using filters

Retention rate β 10 ≥ 75.

Shanghai Weitelui Industrial Development Co., LtdExcellent service and guaranteed reputation. Our company has a branch in Germany, and you can contact me anytime for inquiries about hydraulic and pneumatic products from European and American brands!

Project support:

KRACHT Clark from Germany provides on-site selection and technical support for flow meters and indicators, and has competitive purchasing prices for gear pumps, valves, and spare parts

VSE Germany (flowmeter provides project selection and technical support)

In addition, there are many brands that also have advantages:

Beinlich Bailey pump (optional)

RICKMEIER pump (optional)

MTS sensor

TEMPOSONICS sensor

MEISTER flow switch

KOBOLD flowmeter, temperature switch

ATOS hydraulic solenoid valve, pump, pressure relay

WEBTEC flowmeter, flow indicator

HYDAC Hedec filters, filter cartridges, sensors

P+F Beckhoff sensor, safety barrier

HAWE hydraulic pump, hydraulic valve

VESTA Vesta cylinder, solenoid valve