German EPK McCotter Coating Thickness Gauge S3

German EPK McCotter Coating Thickness Gauge S3Measurement range of enamel, plastic, and rubber layer thickness gauge on steel: 0.2... 3 mm

Pre sales consultation, in sales sales, and after-sales service for the German EPK McCotter series thickness gauge. Repair, magnetize, calibrate, replace parts service.

Measurement principle: The measurement of coating thickness is based on magnetic attraction. The suction force is related to the distance between the permanent magnet and the steel substrate. This distance represents the coating thickness to be measured. The magnet is lifted from the surface by a spring connected to the magnetic arm. The force required to lift the magnet is directly related to the rotation angle of the torsion spring. This measurement principle is also particularly suitable for electroplating nickel on non-ferrous metals such as copper and aluminum.

Widely used in: shipbuilding industry, power industry, aerospace industry, automotive parts industry, metal products industry

German EPK McCotter Coating Thickness GaugeMikroTestS3：

Standard configuration: MikroTest instrument withhandrail

Soft bag or portable plastic box

User Manual

Selection of EPK McCotter series from Germany:

Paint and electroplating on steel,

Enamel, plastic, and rubber layers on steel

G6: 0 …100 μm

F6: 0 …1000 μm

S3: 0.2…3 mm

S5: 0.5…5 mm

S10: 2.5…10 mm

S20:7.5…20 mm

Measurement of electroplated nickel layer on non-ferrous materials:

By 50 ： 0 … 50 μ M

By 100 0 … 100 μ M

Electroplated nickel layer on steel:

NiFe50： 0 …50 μm