German AVEENTICS compact cylinder R422001002

German AVEENTICS compact cylinder R422001002

AVENTICS ™ Compact cylinder ISO 21287, series CCI R422001002

The AVEENTICS CCI series (ISO 21287) cylinders are innovative, compact structures and easy to clean designs. The CCI series (ISO 21287) is highly suitable for long stroke and higher optimization cycles and displacement clumping problems. This sensor can be easily and quickly installed on all sides and along the entire length of the cylinder.

Technical data

Industry Industry

Standard ISO 21287

Piston - Ø 16 mm

Travel distance 5 mm

Interface M5

Practical principle double acting

Buffer elastic é tlumen í

Magnetic Pin P í st s Magnet

Industrial standards for environmental requirements

Optional in ATEX

Piston connecting rod thread - type internal thread

Piston rod thread M4

Single piston rod

Dust ring standard industrial dust scraper ring

Determine the pressure of piston thrust at 6.3 bar

The piston force for retraction motion is 95 N

The piston force of the extended motion is 127 N

Environmental temperature -20 ° C-80 °C

Minimum operating pressure 1 bar

Maximum operating pressure 10 bar

Impact energy 0.15 J

Weight 0 mm stroke 0.059 kg

Weight+10 mm stroke 0.016 kg

Maximum travel 300 mm

Compressed air medium

Minimum medium temperature -20 ° C

The maximum temperature of the medium is 80 ° C

Particle size max 50 µ m

The oil content in compressed air is the smallest , 0 mg/m³

The maximum oil content in compressed air is 5 mg/m ³

material

Stainless steel piston rod

Dust ring material polyurethane

Sealing material polyurethane

Aluminum material for front cover plate

Aluminum cylinder tube

Aluminum back cover

Material number R422001002

German AVEENTICS compact cylinder R422001002

Technical Information

ATEX certified cylinders (marked II 2G Ex h IIC T4 Gb/II 2D Ex h IIIC T135 ° C Db_X) can be equipped on the network

Generated in the device.

The operating temperature range for ATEX certified cylinders is -20 ° C... 60 ° C

If the cylinder is equipped with an extended piston rod, the dimensions "WH" and "ZB" will correspondingly increase in length.

The pressure dew point must be at least 15 ° C lower than the ambient and medium temperature, and the maximum allowable temperature is 3 ° C.

The oil content of compressed air must remain constant throughout its entire service life.

Only oils approved by AVEENTICS company can be used. For detailed information, please refer to the document "Technical Information"