Geological microscope

How to use geological microscope correctly

1Geological microscopePreheating work

Regardless of the type of instrument or equipment, there must be a preheating process before use. The purpose of doing so is to work more smoothly and also reduce the working pressure of the microscope, which can extend the service life of the microscope to a certain extent. Before use, we need to turn on the light source and preheat it with an ultra-high pressure mercury lamp for 15 minutes to achieve the desired effect.

2. Adjust the light source

Fluorescence microscopy uses a low magnification mirror for observation, which requires adjusting the position of the light source center before the measured object can be clearly observed. The use of the adjustment device varies depending on the model of the microscope, and we can make specific adjustments according to the microscope's user manual. By adjusting the position of the light source to be in the center of the illuminated area.

3. Place the specimen

After adjusting the light source, you can place the smoked hotel specimen on the microscope. We cannot conduct direct observation, we need to observe after installing the filter light. If you observe directly without using a filter, it can cause eye damage. After installing the filter, we can place the specimen in the center of the light source and wait for observation.

4. Observation

Everything is ready except for the east wind. Since we are ready for the preliminary work, it will be much easier to observe, as we only need to strictly observe the results.

The above is the usage method of Olympus microscope. We also need to pay attention to its maintenance and upkeep when using Olympus microscope. We can strictly follow the instructions for operation and do not operate according to our own preferences, as this may cause damage to the microscope. I hope through the editor's compilation, you already know how to use this microscope.