Gas well type tempering furnace

※Product Usage

Gas well type tempering furnace is used for heat treatment and tempering of various long structural components. Mainly suitable for heat treatment of drum and large shaft products, it can be used for product weight not exceeding10Ton, size not greater than φ900×6500mmUsed for heat treatment such as quenching and tempering of products.

※Product Features:

1.The combustion medium is heated by natural gas, which is fully burned, pollution-free, and has a fast heating speed. The maximum operating temperature can reach900℃, smoke emissions comply with《GB9078-88Emission Standards for Smoke Layer of Industrial Kilns;

2.The furnace lining adopts an alumina ceramic fiber module structure, which has low heat storage, low heat loss, and significant energy saving;

3.Heating adopts high-speed pulse burners, evenly distributed on both sides. Continuous proportional adjustment combustion, the actuator adjusts the size of the air flow, and the gas volume is adjusted through a proportional valve. To achieve air-fuel ratio combustion, there are lower limit limits for gas and air volume, and control solenoid valves are installed on the gas pipes of each burner. Each burner is equipped with an independent and complete combustion controller, which has automatic ignition, flame detection, fire alarm, and automatic gas cut-off. This fully ensures the stability and safety of the combustion temperature control system;

4.Control system: adopting intelligent technologyPLCComputer-controlled automatic control.