Gas phase liquid automatic sampler

NegotiableUpdate on 06/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

HT300A high-efficiency gas-phase liquid automatic sampler: elegant and graceful rotary injection method, does not occupy the injection port, and also takes into account manual injection;

Product Details

HT300ACharacteristics of gas-phase liquid automatic sampler

★ Elegant and generous rotary injection method, does not occupy the injection port, and takes into account manual injection;

The injection needle uses four different solvents or sample cleaning to minimize sample cross contamination to the greatest extent possible;

For certain models of gas phase, two injection ports can be used simultaneously, with the function of a dual tower automatic sampler;

★ Internal standard injection technology;

★ Adjustable needle depth and comprehensive optimization of chromatographic parameters;

★ Multiple injection modes can be set (hot needle injection, cold needle injection, and "sandwich" injection) to effectively reduce sample size

Discriminatory effect;

The sample extraction and injection speed can be adjusted arbitrarily to adapt to samples with different viscosity coefficients;

★ Accurate positioning and precise stepper motor to ensure no bending of the needle phenomenon;

★ Seamless compatibility with various gas chromatographs;

★ New IQ/OQ/PQ support services

There are two versions of automatic samplers available for different customer needs, one with 110 samples and the other with 10 samples.

HT300AGas phase liquid automatic samplerSpecifications：

Number of samples	110 or 10 (2 ml sample bottles)
Injection needle capacity	You can choose 1ul, 10ul, 25ul, 50ul or 100ul (standard configuration is 10ul)
injection volume	Zui can reach as little as 0.1ul
Air Volume	Zui can reach as little as 0.1ul
Extraction speed	Can be set from 0.1 to 100 ul/sec
Injection speed	Can be set from 0.1 to 100 ul/sec
Needle washing program	Can be set to repeat up to 15 times, providing four types of solvents for cleaning
Injection mode	The repeated extraction method can effectively remove bubbles and can be set to repeat up to 15 times
Dual injection mode	Only applicable to certain models (with front and rear injection ports), such asShimadzu GC-17/2010、Varian3400/3800
	Efficient injection: Two types of samples can be automatically injected into two injection ports in sequence for efficient analysis.
	Confirmation injection: The same sample can be automatically injected into two injection ports in sequence for confirmation analysis experiments.
Viscosity delay	Can be set to 1 to 60 seconds
Internal standard injection	1. The minimum injection volume can reach 0.1ul
	2. The minimum air volume can reach 0.1ul
	3. The air gap between the sample or internal standard can be set
Program Method	10 methods that can be set for sample extraction, injection, and cleaning, with a minimum volume of 0.1ul, and 15 steps that can be set
compatibility	Collaborate with various atmospheric manufacturers（Agilent，Perkin Elmer，Varian，Shimadzu，ThermoSeamless compatibility, sample tray can be freely changed to the left or right.
control software	HT-Comsoft-AperhapsClarityChromatography workstation