GS-11 type elevator displacement sensor brake detection switch

GS-11 type elevator displacement sensor brake detection switch

Luoyang Qiaoyang Mining Machinery Co., Ltd. supplies various types of monkey car accessories, cage accessories, complete models, and supports customization. The 2J10-1 displacement sensor is designed to measure the clearance (displacement) of the lifting mechanism brake Its shell is a delicate stainless steel cylinder with an integrated structure, easy to install, and has resistance to vibration and impact Advantages such as linearity and good stability It can also be used for displacement stroke measurement and process control in other industrial automation equipment and automation machinery industries

Displacement sensor ZJ10-1 type hoist winch braking device

technical parameters

1. Electrical travel: 0-10mm

2. Output signal: 4-20mA

3. Accuracy of working section: ± 1%, (4-20mA/0-10mm linear variation)

4. Environmental temperature: -20--60 ℃

5. Power supply voltage: 15-24VDC

6. Load: 2502

7: >5x10 times

III Installation method

Place the sensor push rod on the top surface of the brake bolt, adjust the front and rear positions, and in the closed state, make the mechanical stroke about 5m (as shown in Figure 1, the output value of the connected sensor is 12mA, and as shown in Figure 2, the output value of the sensor is 3V). Then fix the sensor with a fastening nut. When connecting the three core aviation socket of the sensor to the three core on the virtual electrical connection, align the plug notch with the sub port of the socket to insert smoothly. If it is necessary to remove the connecting plug cable, compress the elastic clip of the aviation plug, and then remove it.

Four precautions:

Please strictly follow the instructions and wiring diagram when wiring.

When measuring displacement gaps, try to use the middle section of the electrical stroke as much as possible.

3. The sensor can work immediately after being powered on. After preheating for 30 minutes, the output signal is stable. This sensor is a precision component, and manual disassembly, modification, and violent tapping are prohibited.

If any abnormalities are found during use, the power should be immediately turned off, the equipment should be stopped from use, troubleshooting should be carried out, and professional technical support should be sought.

5. The warranty period for this product is one year after delivery to the user, and the manufacturer provides warranty or replacement for non quantity issues within one year.

GS-11 type elevator displacement sensor brake detection switch