GC-BS3 4 three-phase power transmitter

NegotiableUpdate on 03/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product model: GC-BS3 4

Product Details

Product characteristics

Equipped with remote communication function, the RS485 communication interface is electrically isolated from the inside of the device, and a lightning protection circuit is designed;
Support DL/T645-2007; Support MODBUS-RTU communication protocol
Can operate continuously for a long time, achieving measurement and control of power system parameters;
35MM standard guide rail installation;
Supports 3-channel analog transmission output.

Application

Power combination transmitter is a device that isolates and transmits electrical parameters such as current, voltage, frequency, power, and power factor in the power grid into linear DC analog or digital signals. This product can be widely used in energy management systems, substation automation, distribution network automation, residential power monitoring, industrial automation, intelligent buildings, negative control systems, switchgear, and other scenarios.

TECHNICAL INDEX

Communication input	electric current1A，5Aclass
Input load	current transformerCT：≤0.2VA
Communication input	AC100V、220Vperhaps400V(Please specify when placing an order)
Input load	voltage transformerPT：≤0.2VA
input overload	1.2Twice sustained
overload capacity	Acceptable 1.2 Multiple rated values (continuous),2 Double rated value（12s）
accuracy	0.5%
response time	＜400ms
Output voltage	0~10Vdc,0~5Vdc(Load resistance=input voltage/10mAdc)
output current	0~20mAdc,4~20mAdc(Load resistance=10Vdc/Output current)
Working environment temperature and humidity	0~50℃/less than80%Relative humidity (non condensing state)
Storage environment temperature and humidity	-20~70℃/less than70%Relative humidity (non condensing state)
Use power supply	AC86~265V/DC110~300V
quarantine	input/output/power supply/casing
Power consumption	power waste:≤5VA
Housing material	ABSFireproof materials
weight	make an appointment 500 can
compressive strength	input/power supply>2kV, input/output>2kV, output/power supply>2kV
Insulation impedance	Input, output, and power supply to the chassis>5MΩ
External dimensions	120（L）×110（W）×75（H）mm
Installation method	35mmInstallation of standard guide rails and base screws