G6 coating thickness gauge does not require calibration and automatically measures one point

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The RESETO G6 coating thickness gauge can measure the thickness of all non-magnetic coating layers on steel (such as paint, powder coating, plastic, zinc, copper, tin). Fast and non-destructive measurement, RESETO has become a widely used instrument for automatic determination of coating thickness. $r $n G6 coating thickness gauge does not require calibration and automatically measures one point

Product Details

RESETO G6 Coating Thickness GaugeCapable of measuring the thickness of all non-magnetic coating layers on steel (such as paint, powder coating, plastic, zinc, copper, tin). Fast measurement Non destructive, RESETO has become a widely used instrument for automatically measuring the thickness of coating layers. Germany's "trick" indicates that it has the level of magnetic coating thickness gauges in terms of process technology and accuracy.

All instruments comply with DIN, ISO, and ASTM standards. RESETO G6 * automatic operation. When used, it has the following characteristics of *:

G6 coating thickness gauge does not require calibration and automatically measures one point

1. Automatic measurement will not cause misoperation

2. Easy to master and with * accuracy

3. No need for calibration, setting, and easy detection

4. No need for batteries or other power sources

5. Automatically report the thickness reading value

6. Use a non-destructive probe to measure at one point

7. Metal armor is suitable for frequent outdoor operation and use

8. Resistance to mechanical impact, acid resistance, and solvent corrosion

9. The balance device eliminates the influence of gravity and can accurately measure in any direction and inside the tube.

G6 coating thickness gauge does not require calibration and automatically measures one point

Technical specifications

Model number G 6

Measurement range 0-100 μ m

Reading accuracy 1 μ m or 5% reading value

Measurement area diameter 20mm

Convex radius 5 mm Concave 25 mm

Matrix thickness 0.5 mm

Suitable for electroplating on steel，Paint, enamel, plastic, rubber layer

G6 coating thickness gauge does not require calibration and automatically measures one point

According to the substrate and thickness of the workpiece, the following models can be selected:

Model number	measurement range	Reading accuracy	Measurement area -Diameter (greater than)	Radius (greater than) Convex concave mm mm	matrixThickness (greater than)mm	for
ResetG 6	0－100μm	1 μ m or 5% reading value	20mm	5 25	0.5	Electroplated coating on steel(Nickel plating, chrome plating, etc.)Paint, enamel, plastic, rubber layer
ResetF 6	0－1000μm	5 μ m or 5% reading value	30mm	8 25	0.5
Reset6 S3	0.2－3mm	5% reading value	30mm	15 25	1.0
Reset6 S5	0.5－5mm	5% reading value	50mm	15 25	1.0
Reset6 S10	2.5－10mm	5% reading value	50mm	15 25	2.0
Reset6 S20	7.5－20mm	5% reading value	1000mm	100 150	7.0
Reset6 Ni50	0- 50μm	1 μ m+5% reading	15mm	5 25	-	Nickel plating on non-ferrous substrates
Reset6 Ni100	0- 100μm	1 μ m+5% reading	15mm	5 25	-	Nickel plating on non-ferrous substrates

Technical specifications

Model number G 6

Measurement range 0-100 μ m

Reading accuracy 1 μ m or 5% reading value

Measurement area diameter 20mm

Convex radius 5 mm Concave 25 mm

Matrix thickness 0.5 mm