Fully automatic utensil cleaning machine

★ Working conditions:

1. Working voltage: 220/380V, 50/60Hz.

2. Cold water source: meets the national standards for urban tap water, with a water pressure of 1.0-5.0kg/cm2 and a water temperature of 5-40 ℃.

3. Pure water source: Meets the Class III/I water standard of GB6682-2008 for water used in Chinese analytical laboratories.

★ Control system

1.Fully automatic utensil cleaning machineAdopting Siemens imported PLC control system for more stable operation (not controlled by microcomputer chips or microcontrollers), 7-inch liquid touch crystal display screen, 10 standard cleaning programs, and customers can set multiple custom cleaning programs according to their needs;

2. Interlocking device: Electronic door lock for safe operation, which can be opened through buttons, programs, and manual methods;

3. Operation permissions: operator, administrator, system engineer; Each level has corresponding customizable permissions for setting and modifying system parameters;

4. Alarm device: The control system should sound an alarm for equipment abnormalities and deviations, and can achieve automatic sound alarm. The alarm information should be displayed on the screen and recorded automatically. The alarm information can be displayed on the operation interface.

★ Online monitoring

1. Interlocking device: Ensure that the door lock cannot be opened while the equipment is in operation to prevent scalding from hot water;

2. Water inflow monitoring: Ensure normal water demand during equipment cleaning process;

3. Dual temperature monitoring: Accurately control the temperature according to the cleaning temperature chart;

4. Overheating protection: When the circulating pump is detected to be overheated, the equipment will automatically shut down to prevent damage to the machine;

5. Cleaning agent monitoring: Ensure that there are sufficient chemical reagents during the cleaning process.

★ Loop system

The Swedish imported ring pump has the largest circulation capacity and can automatically adjust from 0-450L/min. It is equipped with soft start and overload prevention sensors to protect the pump from gentle start-up and extend its service life.

★ Distribution of cleaning agents

1. Peristaltic pump for liquid acidic additives (1 unit)

2. Peristaltic pump for liquid cleaning agents (1 unit)

3. Cleaning agent with built-in 2 × 5 liter container

★ Equipment structure

1. Loading door: front loading and equipped with a pull-down door;

2. Structure: The inner cavity is integrally formed by mold, not manually welded, and the double-layer detachable insulation and sound insulation shell design is adopted;

3. Material: 304 grade stainless steel shell, 316L grade stainless steel liner, with anti-corrosion function;

4. Water inlet method: The top coupling device of the basket frame is used to better distribute the cleaning solution;

5. Spray system: Equipped with upper, middle, and lower rotating spray arms as standard, adopting fan-shaped nozzles and asymmetric design to ensure wider cleaning coverage;

6. Loading basket rack: Two layers of cleaning basket racks can be placed.

★ Drying system

1. Air filtration: High efficiency filter/HEPA is used, without the need to remove the cover plate, and the filter cotton can be directly replaced outside the equipment (physical equipment photos need to be provided as proof);

2. Fan: air flow rate of 60m3/hour;

3. Hot installation device: 1.5KW4. Steam condenser: Dual steam condensers are used to convert water vapor into liquid during the drying process and discharge it, avoiding increasing the humidity of the room while protecting electronic components from damage.

★ IoT system (optional)

Fully automatic utensil cleaning machineWith its own GPS positioning system, it can sense the operation status of the equipment and the operation data of the equipment through the Internet protocol to the cloud for big data aggregation and analysis. If the equipment fails, it will automatically send the fault information to the relevant after-sales personnel, which can avoid unnecessary repair reports and reduce the standby time.