Fully automatic thermal energy analyzer

Fully automatic thermal energy analyzer
The HKRL-5000 fully automatic thermal energy analyzer adopts an advanced microcontroller system and imported chips from the United States to control the instrument to achieve automatic water filling, automatic water temperature adjustment, automatic water metering, automatic stirring, and automatic ignition. Simply install the oxygen bomb, input the sample weight, and the instrument will automatically complete the entire testing process. Adopting unique/specialThe cooling correction system, water circulation system, and software automatic and error compensation system of the system have functions such as large water storage capacity of the outer cylinder and good thermal stability. The Chinese menu style operation interface has a simple structure, intuitive and easy to learn operation, stable and reliable performance, and strong anti-interference ability by adopting inner and outer cylinder photoelectric isolation.
Technical Indicators:
Temperature measurement range: 5-40 ℃
Temperature resolution: 0.0001 ℃
Precision: ≤ 0.1%
Single sample testing time: about 9-12 minutes
Heat capacity: approximately 10450J/K
Outer bucket capacity: approximately 40L
Inner bucket capacity: approximately 2.1L
Power supply voltage: AC220 (1 ± 10%) V, 50Hz

The main structure of the calorimeter:
The main components of the calorimeter include: outer shell, outer cylinder, inner cylinder, stirrer, oxygen bomb, etc.
(1) The shell is made of high-quality cold-rolled steel plate, and both the inner and outer layers are coated with spray technology.
(2) The calorimeter outer cylinder is a double-layer sleeve made of stainless steel. The circulating water pump can adjust the water temperature evenly. The cylinder wall has inlet, outlet, and overflow ports for easy adjustment of water temperature and level.
(3) The inner cylinder is a stainless steel container with an elliptical cross-section, polished on the surface to reduce heat radiation and heat exchange.
(4) The mixer is composed of a micro motor, a mixing shaft, and a slurry, and is fixed on the cover.
(5) The oxygen bomb is made of special stainless steel and passes the 20Mpa water pressure inspection before leaving the factory.