Fully automatic folding tube kinematic viscosity tester

Fully automatic folding tube kinematic viscosity testerModel: DP-T0956

Overview

DP-T0956Fully automatic folding tube kinematic viscosity testerUsed for measuring the kinematic viscosity of transparent and opaque liquids, suitable for base oils, blended lubricants, diesel, biodiesel, biodiesel blended fuels, and in use lubricants.

indicator parameters

1. Working power supply: AC220V ± 10%, 50 ± 10% Hz, the protection end of the AC power supply must be reliably grounded;

3. Control module: PLC integrated module, electronic circuit, touch screen control;

4. Display module: 12 inch MCGS configuration touch screen

5. Vacuum pressure: -70Kpa (low noise);

6. Cleaning flow rate: 90mL/min (adjustable);

7. Cleaning valve body: Stainless steel three-way valve body (corrosion-resistant and durable), SMC two-way valve (corrosion-resistant and durable);

8. Liquid pipeline: Fluororubber hose

9. Mixing motor: DC motor

10. Temperature control module: Temperature control module;

11. Temperature measurement range: room temperature~120 ℃, temperature control accuracy: 0.01 ℃

12. Detection technology: infrared photoelectric technology, timing accuracy: 0.001s;

13. Measurement range: 0.3-6000mm ²/s, with two viscosity tubes measuring a span of 100 times;

14. Sample dosage: 0.3-1mL;

15. Constant temperature oil bath: 2 (independently controlled at 20-120 ℃);

16. Repeatability: ≤ 0.68%;

17. Testing time: Results will be available in 3 minutes;

18. Whole machine power: rated power 800W, power 1200W;

19. Dimensions: 420x780x580 (mm);

20. Pump box size: 410x230x430 (mm);

21. Total weight: 88kg (with pump box)

22. Operating environment: Temperature: 25 ℃± 10 ℃, Humidity:<85%

24. Data: The device software can record experimental data and can be integrated with multiple systems for uploading.

Indoor inhalable particulate matter samplerModel: DP-13

The DP-13 indoor inhalable particulate matter sampler is a small portable sampler. An instrument that can be used for air microbiological monitoring and experimental research in the food industry, fermentation industry, industry and agriculture, as well as relevant research departments.
Technical specifications:
1. The flow meter has a range of 3-30 liters per minute. Usually using 20 liters per minute.
2. Its capture rate is over 95%.
3 Timer: Electronic Timer: Long term timer99 minutes, with an error accuracy of no more than 10 seconds.
4. Power supply: AC 220V ± 10%, 50HZ. DC: 12V
5. Power consumption ≤ 45W.
6. Noise ≤ 68ab.
7. Volume: 290 × 220 × 200 mm3.
8. Weight: 7Kg

Direct reading electronic density meter(Specific gravity balance)/Electronic density meter model: GP-300

1、 Direct reading electronic density meter (solid) product introduction:

Solid density meter can quickly and conveniently measure the density of solids of various shapes, equipped with measuring accessories, and integrated into a transparent water tank. Convenient to carry and easy to operate.

2、 Application range of direct reading electronic density meter (solid):

Widely used in rubber, plastic, granules, floating bodies, ceramicsThe density of various solids such as PVC pipes, sheets, plastic products, powder metallurgy, magnetic materials, rocks, sponges, PE particles, wires and cables.

4、 Technical parameters of direct reading electronic density meter (solid):

LCD screen static strain gauge/Static strain gauge model: DP7110Y

apparent Display: LCD screen display,

measure point Number:ten o'clock

quantity Cheng:0~30000min

divide distinguish Rate:0.1m

jump move Quantity:±0.2m@1Hz

Measurement error:±0.01% FS±0.5mn

Balance range:0~± 20000 μ ε strain resistance: 60-1000 Ω

Bridge form: full bridge, half bridge1/4 bridge (public compensation), three wire system 1/4 bridge, two wire system 1/4 bridge, mixed bridge and road settings, quarter of the bridge and road do not require short connectors, eliminating the influence of thermoelectric potential

Wiring terminal: angled plug type, convenient for wiring; The torque of the screw is conventional3 times (2N · m); Crocodile patterned gasket; Equipped with welding points, suitable for long-term measurement; Compatible with 3mm and 4mm standard plug insertion.

stable fixed Sex: PreheatingAfter 20 minutes, the temperature drift is ≤± 1 μ ε/24h

+Warm float≤±1m/168H

Supply bridge voltage:DC 2V

Three wire strain gauges: Supports self compensation of three wire strain gauges.

Resistance measurement and bridge connection error detection;

Local massive storage and export of data;

Each measuring point can freely select measurement signals such as stress-strain, force, displacement, etc., and set them on the LCD screen;

Power off reconnection, computer working status, instrument automatically saves parameter settings, automatically connects to power off status when incoming, continues to collect data;

electricity Source:AC 120~220V B DC 9-48V

Parameter setting: Single machine operation, all test parameters are set on the touch screen, working away from the computer; Connect the machine and set all parameters on the computer.

Static sampling rate: high0.25 seconds (4Hz) to collect all 10 strain values, high-precision sampling takes 5 seconds to collect all 10 points;

Operating Temperature-20～70℃

Operating Humidity:8～90%RHNC

dynamic testing(Optional) Parameters:

Dynamic testing: everyAny point taken from 10 points (per strain gauge) can be used for dynamic data acquisition, with seven sampling frequencies available: 200Hz, 100Hz, 50Hz, 20Hz, 10Hz, 5Hz, 2Hz, and 1Hz.

Glass Floatation Comparison Density MeterDensity comparator model; MDS-2

The MDS-2 sinking floating comparative density meter is used to determine the density values of glass or other non porous solids with a density of 1.1-3.3 g/cm3. It can also be used to determine the apparent density of ceramics or solids with known porosity. It is suitable for glass production plants to control glass production through continuous glass density testing, and is also suitable for scientific research institutions to measure and study the density of other solid substances such as glass.

Main technical indicators of MDS-2:
1: Temperature display range: 10 ℃ -50 ℃
2: Temperature display accuracy: ± 0.01 ℃
3: Heating rate: better than 0.1 ± 0.02/min
4: Electromagnetic stirring: stepless speed regulation 1-1000 revolutions per minute
5: Water bath temperature difference: Horizontal temperature difference: 0.01 ℃
6: Vertical temperature difference: 0.03 ℃
7: Measurement accuracy: ± 0 1g/cm3
8: Power supply and power: 220V; 1000W.
9: Product reference: Glass density measurement using the comparison method of sinking and floating.