Welcome Customer !

Membership

Help

Shanghai Fengyu Filter Equipment Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Shanghai Fengyu Filter Equipment Co., Ltd

  • E-mail

  • Phone

  • Address

    No. 230 Chuanxie Road, Fengcheng Town, Fengxian District, Shanghai

Contact Now

Fully automatic cleaning filter

NegotiableUpdate on 05/13
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The fully automatic cleaning filter is installed on the water supply pipelines of various industries such as power plants, chemicals, printing and dyeing, and papermaking. It is mainly suitable for pipelines below 500mm, which can replace secondary filters and save costs. It is a key equipment for optimizing the management of the above system, especially suitable for unmanned and few manned water and electricity departments. This water filter is a device with automatic filtration, cleaning, and discharge functions. It eliminates particles and suspended solids in water and serves as an automatic filtration device for technical water supply

Product Details

1Fully automatic cleaning filterpurpose

Shanghai FengyuFully automatic self-cleaning filterInstalled on water supply pipelines in various industries such as power plants, chemicals, printing and dyeing, and papermaking, it is mainly suitable for pipelines with a diameter of less than 500mm, which can replace secondary filters and save costs. It is a key equipment for optimizing the management of the above system, especially suitable for unmanned and few manned water and electricity departments. This water filter is a device with automatic filtration, cleaning, and discharge functions. It eliminates particles and suspended solids in water and serves as an automatic filtration device for technical water supply The LD type fully automatic water filter is a rotary type, which consists of an actuator and an automatic control mechanism, including a reducer device, a water filter body, an electric drain valve, a differential pressure controller, and an electrical control box. The cleaning and sewage discharge process of this water filter can be carried out under uninterrupted and normal technical water supply.

IIFully automatic cleaning filterworking principle

Shanghai FengyuFully automatic self-cleaning filterWorking process: After the water filter is connected to the pipeline system, water enters the filter through the lower inlet, and the filtered impurities flow out from the outlet. When the impurities in the water pass through the mesh core, they are trapped on the mesh core due to their larger volume than the mesh core holes. When they accumulate to a certain amount, there is a certain pressure difference between the inlet and outlet. When the water pressure difference between the inlet pressure gauge and the outlet pressure gauge of the filter increases to the specified value (the pressure difference varies depending on the accuracy and diameter of the filter, usually 0.15Mpa), the drain valve is opened and put into operation. The water flow backwashs the impurities and dirt attached to the inner wall of the filter core in reverse, and the attached matter is discharged from the filter screen. When the pressure difference between the inside and outside returns to normal, the drain valve is closed to complete the filtration and drainage process.

3、 Advantages or characteristics

Small in size, convenient for on-site layout and installation, and easy to repair, maintain, and adjust.

The material and structure of the mesh board maximize the flow area of the water flow, effectively reduce the water resistance of the filter screen, ensure reliable operation without jamming, blocking, or blockage, and greatly extend the filter screen.

The filter screen is formed by integral stamping of 3-6mm stainless steel plate, and the core should be able to withstand a differential pressure of 150 kPa without deformation or damage. It has the characteristics of long working life, corrosion resistance, no rust, smooth surface, and no scaling.

The FYD fully automatic type uses a differential pressure controller to automatically start the gearbox at regular intervals for forward and reverse flushing, which has strong cleaning effect and low water consumption for sewage discharge.

Stable operation and minimal impact on outlet water pressure during cleaning, required for online operation.

FYDThe fully automatic type has complete functions and is easy to install. It only needs to be connected to an AC380V, 50HZ power source to start automatic operation. It is controlled by a PLC microcomputer and can implement timed, differential pressure, and manual control for cleaning. It has a water filter fault alarm function and can be networked with a computer for network control.

High reliability, long lifespan, and low energy consumption.

4、 Main technical parameters

Nominal pressure: 1.0MPa; 1.6MPa

Work pressure: 0.3-1.0MPa 0.3-1.6MPa

Working medium: water

Design loss pressure drop: 0.02MPa

Filtering accuracy: diameter 1-6mm (can be made according to user requirements)

Cleaning methods: FYD automatic, FYS manual. Rotate the sewage fork pipe and backwash the filter screen of the filtration unit in sequence.

Discharge methods: FYD automatic, FYS manual. The butterfly valve is open.

Installation method: The water filter is installed upright, and the drain valve can be installed arbitrarily.

Working power supply: AC380 V 50HZ

Medium temperature: 5-50 degrees Celsius

Environmental humidity: 95%

Differential pressure controller enclosure protection level IP65

Key output points of the water filter electrical control box:
A. Alarm for high pressure difference of water filter.
B. Cleaning motor malfunction alarm.
C. Malfunction alarm of sewage motor.

Shanghai Fengyuprinciple

When water enters the filter cartridge from the inlet, impurities are intercepted on the inner wall of the filter cartridge, and filtered clean water flows out from the outlet. As the impurities accumulate on the inner wall of the filter cartridge, the pressure difference between the inlet and outlet of the self-cleaning filter reaches the preset value, reaches the cleaning time, or is manually prefabricated. The filter will start the self-cleaning process, which includes two steps: opening the automatic drain valve located on the self-cleaning filter; The motor drives the cleaning brush inside the self-cleaning filter screen, and the impurities intercepted by the filter screen are discharged from the drain valve. The system does not stop flowing during cleaning, and the entire operation process of the self-cleaning filter is controlled by a randomly equipped intelligent control box. The control methods can be selected from differential pressure, time, manual, and PLC control.

The DLD-FB series self-cleaning filter can achieve automatic cleaning, automatic drainage and other functions online. It is equipped with differential pressure/time/manual three functions for operation, and has the advantages of high filtration accuracy, short backwashing time, low cleaning water volume, and low pressure loss. It provides a stable water quality assurance certificate for your water system.

FYD typestructure diagram

FYD seriesTechnical Data Sheet

model

A(mm)

B(mm)

C(mm)

D(mm)

Discharge outlet (mm)

Motor power (KW)

Flow rate (m³

Weight (Kg)

FYD-80

1100

510

683

673

40

0.09

50

87

FYD-100

1200

583

683

673

40

0.09

80

106

FYD-125

1300

620

683

673

40

0.18

125

132

FYD-150

1500

670

744

725

40

0.18

150

197

FYD-200

1800

720

820

777

40

0.18

320

248

FYD-250

2160

770

874

826

40

0.18

490

360

FYD-300

2370

820

939

908

50

0.25

710

486

FYD-350

2720

870

1026

1010

50

0.25

970

653

FYD-400

3076

920

1098

1111

50

0.25

1260

765

FYD-450

3433

970

1199

1213

50

0.25

1600

814

FYD-500

3807

1020

1288

1250

65

0.55

1970

920

Filter material

■ Shell: Carbon steel, 304 stainless steel, 316L stainless steel

■ Filter: 304 stainless steel, 316L stainless steel

Brush holder: 304 stainless steel, 316L stainless steel

■ Discharge valve: cast iron, copper, stainless steel

Controller: PVC, aluminum

■ Sealing ring: EPDM rubber

Cleaning brush: stainless steel, nylon

Note: Special materials such as nickel and titanium alloys can be selected according to customer needs. Please consult the company for specific information.

Equipment installation and connection

1. Installation of equipment body

(1) When installing and using, attention should be paid to protecting the control box, sensors, and transmission parts to prevent damage.

(2) Connect the pipeline in the direction indicated by the arrow on the self-cleaning filter body, so that the water flow direction matches the arrow on the body. The FB series self-cleaning filter has two installation forms (see the figure below). When adopting either installation form, attention should be paid to making the outlet direction of the automatic drain valve horizontal or downward to ensure better drainage.