-
E-mail
isotopems@163.com
-
Phone
13581995132
-
Address
Room 414, Building 1, No. 19 Xianlongshan Road, Haidian District, Beijing
Product Categories
Beijing Danjian Deyan Instrument Co., Ltd
Fully automatic blowing and capturing device
NegotiableUpdate on 01/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Instrument Introduction: The $r $nPTC VI fully automatic blowdown and capture instrument is a blowdown and capture instrument with a 116 bit automatic sampling system, which can be used for the detection of volatile organic compounds in solid or liquid samples. It has efficient capture and water removal performance, intelligent and convenient labeling technology, and can not only accurately add internal standards, but also automatically label and draw target substance standard curves. By combining with GC or GC-MS, it can be widely applied in environmental analysis, such as the analysis of organic pollutants in drinking water, wastewater, and soil, as well as the analysis of volatile compounds (such as odor components) in food.
Product Details
Key Features:
l Strong universal performance: can be used in combination with any brand of gas chromatograph (GC) and (GC-MS)
l Automatically add internal standards, can automatically configure gradient standard samples
l Electronic flow control system programmed precise control of flow
l The host adopts a touch liquid design, and all operations are completed on the touch screen,No need for an upper computerCan track temperature and operation commands throughout the entire process
l The instrument can store and run multiple methods
l Dual needle design for water and soilTo avoid cross contamination
l The instrument has a built-in self-test function, which can automatically detect leaks and monitor pressure
l Cold trap refrigeration to meet most low-temperature enrichment needs
l The temperature rise of the capture trap is achieved through direct resistance heating
l Solid sample bottles can be heated and directly injected with distilled water for magnetic stirring, mixing, and blowing
l Capture trap and blowback tube for gas separation to reduce cross contamination between samples. In the blowback cycle, compounds blown out of the capture trap will not flow into the purge tube
l Water removal function, greatly reducing the impact of water vaporGCandGC-MSthe impact of
l The purging tube automatically defoams to prevent foam from contaminating the sample pipeline and protect the entire analysis system
l The sample pipeline adoptsPEEKMaterials and Silanization Inert Treatment of Stainless Steel Pipes to Reduce Pollution Residue
l Support automatic flushing of sampling needles, pipelines, and purge tubes with methanol water and hot water to reduce residue, and customizable cleaning times for sampling needles and purge tubes
l All pipelines and six way valves are temperature controlled for heating, eliminating system cold spots and reducing sample loss
l Provide a synchronization interface that can be used for bidirectional reverse control with GC or GC-MS
