Full automatic foam analyzer

NegotiableUpdate on 12/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The full-automatic foam analyzer is mainly used to measure and characterize the macro performance of foam, such as foaming property and stability. This instrument can be used for both water-soluble and non water soluble vacuole measurements, as the new device is not based on traditional conductivity measurements. Foam quality plays an important role in reservoir conditions, because foam liquidity and foam stability directly depend on foam quality. The advanced infrared data analysis and measurement system not only allows to monitor the dynamic changes of foam, but also can measure the relative quality of foam, as well as the instability or pulsation of bubble holes.

Product Details

1、 Main features

1. Sensitive, accurate, and pollution-free detection

2. Modular design, glass sample tubes can be easily disassembled and cleaned

3. External air compressor to generate foam in multiple modes

4. Good reproducibility and stability

5. Less sample usage - at least 20ml solution is required

6. Fully automatic computer control, sturdy and stable structure

7. Users can customize gas flow rate and bubble time

2、 Technical parameters

1. Bubble method: Blowing method

★ 2. Gas flow rate: 0-500ml/min, accuracy 0.5%, air pump pressure 0.5MPa

★ 3. foam height: collected by video, measuring 0-280mm

4. Liquid volume: The minimum volume of the test liquid sample is 20ml

★ 5. Conductivity: the foam tube has five channels of conductivity measurement, and the conductivity resolution is 0.01us/cm

6. Video system: 5mm telephoto lens, 1.3-megapixel digital camera, speed of 25 frames per second

7. Measurement: a, gas flow rate b, foam volume c, liquid residual volume d, foam conductivity e, liquid percentage

8. Calculation: a, foam maximum density b, Bikerman index c, foam volume stability d, liquid stability in foam e, foam expansion coefficient f, bubble capacity h, foam capacity

9. The pore size distribution range of foam generator is 1.0 μ m-1.6 μ m (standard configuration), (other pore sizes are optional)

10. Fully automatic computer control, sturdy and stable structure

11. Voltage: 220V, Power: 300W

12. Sample tube insulation: built-in heating rod, controllable temperature room temperature -90 degrees (optional)

13. Pre installed data acquisition and processing microcomputer operating system with applications and drivers, connected to the device, running professional software, setting and controlling the device, displaying and storing operating values and curves

14. Appearance specifications: 690 × 310 × 480mm

15. Top foam real-time observation system (optional): special industrial CCD, supporting professional analysis software, which can export data to excel

16. Adding bubble method: Mixing method (optional)

3、 Main configuration

1. Mainly composed of the device host、Data acquisition display control systemWait.

2optical system 1 set

3. Conductivity system 1 set

4. Heating system 1 piece

5. Air pump 1 copy

6. Flow control system 1 set

7. Top foam observation system 1 set

8. Supporting data collection and display system 1 set

9. Mixing device 1 set